Specialty Chemicals

SETATHANE D 1160 is applied in combination with solvent-free, predominantly aromatic polyisocyanates, as a binder for flexible floor coatings. It is the most suitable co-reactant for SETATHANE D 1160 is Desmodur VH 20 N. Other polyisocyanates such as Desmodur VL are also suitable but the compatibility must be tested in each case. SETATHANE D 1160 can be used in the formulation of flexible floor coatings. Coatings based on SETATHANE D 1160 and Desmodur VH 20 N are characterized by their high flexibility and good mechanical strength.

SETATHANE D E 2767 is applied in combination with aromatic polyisocyanates based on diphenylmethane diisocyanate as binder for solvent-free two-component polyurethane coatings with high chemical resistance for concrete and other porous substrates, fillers, sealing compounds and synthetic resin mortars. SETATHANE D E 2767 is suitable for the formulation of coatings, mortars and sealers with high chemical resistance. Coatings formulated with SETATHANE D E 2767 generally exhibit outstanding resistance to organic and inorganic acids, alkalis and solvents. Over-cross linking of 50 % and more is usual. This allows a wide-ranging variation in flow and chemical resistance. To ensure blister-free curing, SETATHANE D E 2767 requires the addition of hydrated lime in accordance with DIN EN 12 518 (or cement if necessary) as a CO2 scavenger. In certain cases where the film thickness is less than 100 μm, there is no need to add hydrated lime.

SETATHANE D 1155 is applied in combination with e.g. SETATHANE D 1145 and 1150 in the formulation of coatings SETATHANE D 1155 is not recommended as a sole binder. Because of its low viscosity, SETATHANE D 1155 is especially suitable for combination with SETATHANE D 1145 and 1150 in the formulation of solventfree, self-leveling polyurethane coatings of low viscosity. Desmodur® VL or VL 50 are normally used as hardener.

SETATHANE D 1145 is applied in the formulation of hard and tough coatings and synthetic resin mortars.It is used in combination with other polyols such as SETATHANE D 1150 and crosslinked with Desmodur VL, SETATHANE D 1145 is suitable for use in the formulation of two-component coatings. The main applications are in the construction industry. Curing yields hard to tough but flexible films which are resistant to abrasion and chemicals. In combination with other polyols such as SETATHANE D 1150 and crosslinked with Desmodur VL, SETATHANE D 1145 is suitable for use in the formulation of two-component coatings. The main applications are in the construction industry. Curing yields hard to tough but flexible films which are resistant to abrasion and chemicals.