Paints & Coatings

SETAL A U 601 TB is in the formulation of hard-wearing wood finishes, parquet sealers, fast-drying synthetic resin coatings and industrial primer surfacers. General SETAL A U 601 TB is an isocyanate-modified alkyd resin which is especially suitable for the formulation of fast-drying, colourless or pigmented, DIY and decorative paints. The paint films have high mechanical strength, hardness and long-term flexibility. They also have good resistance to water, household cleaning agents and many chemicals. The use of the following driers is recommended: 0.03 - 0.04 % cobalt 6, 0.60 - 1.00 % zirconium 18 and 0.05 - 0.15 % calcium 4. The metal content is always calculated on the solvent-free resin. Methylethyl ketoxime has proved ideal as an anti-skinning agent for these formulations. The amount required is 0.7 - 1.3 %, calculated on the solventfree binder. SETAL A U 601 TB can be thinned with the usual solvents. Aliphatic hydrocarbons with small amounts of aromatic and terpene hydrocarbons are especially suitable. Wood finishes: Rapid drying, excellent filmhardness, high abrasion resistance and good longterm flexibility make SETAL A U 601 TB ideal for the formulation of parquet sealers, finishes for chairs and benches, coatings forwindowframes and other coatings for indoor and outdoor use. Because of the good water resistance of coatings based on SETAL A U 601 TB, they are also suitable for use as marine paints. Clear coats based on SETAL A U 601 TB can be matted with standard matting agents. In order to prevent the settling ofmineralmatting agents, the addition of small amounts of SETAL A U 601 TIX TBA is recommended. SETAL A U 601 TB has good compatibility with long-oil alkyd resins, e.g. SETAL A F 681. Combination with such resins increases the solids content and thus the potential dry film thickness of the coatings. 4 : 1 combinations of SETAL A U 601 TB and A F 681 can still be matted well. Coatings based on SETAL A U 601 TB dry to form defect-free films on most Tropical woods so no special impregnation is necessary before hand. However, given the many different types of tropical woods and their very different properties, trials should always be carried out.

SETALUX 1187 XX-60 is in combination with aliphatic poly-isocyanates: excellent mechanical properties and chemical resistance, high-medium solids. In combination with Vestanat T 1890 S: high solid, high build, good gloss, excellent outdoor durability and light fastness, good mechanical properties. It is used as Industrial two-component coatings (in combination with poly-isocyanates such as Desmodur N) with excellent flexibility and mechanical properties. Mixing resin for two-component systems to optimize/improve the flexibility. Combination with Vestanat 1890 S.

SETALUX 1184 SS-51 is an excellent fast drying, very good through hardening, good stackability, long potlife, good chemical resistance, excellent mar and stain resistance, good light fastness, good compatibility with poly-isocyanates. It is used as two-component lacquers and varnishes (especially for wood).

SETALUX 1196 XX-60 is in combination with aliphatic poly-isocyanates: fast drying, good through hardening, good chemical resistance, good light fastness, good compatibility with poly isocyanates. It is used as industrial lacquers with good adhesion on difficult substrates. Lacquers with good adhesion on a number of plastic substrates.