Paints & Coatings

DAPRO U-99 is an interfacial Tension Modifier for Waterborne Coatings.

ADDITOL XL 122 is a paint additive to enhance mar resistance and slip and to improve flow and levelling in air drying and stoving paints. ADDITOL XL 122 is a silicone type paint additive. It enhances the resistance of solventborne paints to mechanical attack by increasing the slip of the paint surface. Furthermore, ADDITOL XL 122 improves levelling and flow prevents surface defects like orange peel and thus in general contributes to the formation of flawless film surfaces with enhanced sheen. In coil coating and can coating paints as well as in furniture enamels ADDITOL XL 122 is used to prevent blocking also. ADDITOL XL 122 can be employed with air drying alkyd resin paints, alkyd resin stoving paints, thermosetting acrylic paints, nitrocellulose lacquers, acid curing paints, alkyd-isocyanate paints or acrylics, isocyanate enamels. Paints containing ADDITOL XL 122 can be recoated in general without additional treatment of the surface. The effect of ADDITOL XL 122 varies with the formulation of the paint. A level of 0.05 to 0.3 % of ADDITOL XL 122 on the finished paint may serve as a guide.

ADDITOL XL 6507 product, serving for trial purposes only. Deviations which might occur during transfer into manufacturing in a commercial scale are possible and do not constitute any material defect. ADDITOL XL 6507 is a solution of defoaming polymers without siliconeSuggested applications are - industrial coatings - 2 comp. acrylic/isocyanate systems - corrosion protection paints based on epoxy resins - wood and furniture coatings based on unsaturated polyesters and UV-curing systems In non-pigmented systems over dark surfaces, a slight turbidity, depending on the added amount, may occur.

MODAFLOW Powder III resin modifier is an efficient flow aid for industrial powder coatings. Very fine, free flowing particles make MODAFLOW® Powder III easy to incorporate into epoxy, polyester, hybrid, urethane or acrylic powder formulations. Like other members of this family, MODAFLOW® Powder III offers users: Improved flow and leveling, Reduced pinholes, fisheyes, craters, and orange peel, Improved substrate wetting and Enhanced initial adhesion. MODAFLOW Powder III is composed of materials regulated by the U.S. Food and Drug Administration (FDA) for indirect food contact applications under several parts of Title 21, Code of Federal Regulations. Details on specific coverage are available upon request. MODAFLOW® Powder III contains no silicone. Optimum concentrations for a specific formulation should be determined by incremental addition. In general, MODAFLOW® Powder III use levels vary between 0.5 - 2.0 parts per hundred resin.