SETAL A E 41 X is a short-oil, fatty acid-modified alkyd resin with extremely low viscosity. In the formulation of nitrocellulose lacquers for wood. Nitrocellulose lacquers. SETAL A E 41 X is an alkyd resin with extremely low viscosity for use in the formulation of nitrocellulose lacquers. It is characterized in particular by the following: unusually fast drying rates, especially at high wet film thicknesses, high flexibility and hardness, excellent sandability and high body combined with good sag resistance of the films on wood, excellent lightfastness, excellent intercoat adhesion. The extremely low viscosity of SETAL A E 41 X results in higher solids contents. SETAL A E 41 X can be combined in various ratios with nitrocellulose to formulate wood lacquers. Because of its unusually fast drying rates, SETAAL A E 41 X has gained particular significance in wood lacquers for application on production lines using conveyor dryers.

SETAL 84 XX-70 is a very good durability, excellent colour and gloss retention , high body. It is used: Stoving enamels, car body enamels, enamels for domestic appliances, laboratory equipment, electric apparatus etc. Clear and pigmented acid curing finishes. Clear and pigmented nitrocellulose lacquers. Clear and pigmented polyurethane lacquers. Roller coatings for high stoving temperatures (120-160 °C), especially overprint varnishes. Coil coatings.

VIACRYL SC 121/60X is a sole binder for road-marking paints. Fast drying primers and top coats for nonferrous metal and plastic substrates.It is used as road-marking paints Viacryl SC 121/60LG was especially developed as sole binder for road-marking paints. Road-marking paints based on this copolymer have excellent adhesion and abrasion resistance, permanent flexibility as well as good whiteness retention. It is, however, recommended to first conduct a trial application under the given conditions to ensure suitability. Coating of plastics One-coat paints based on Viacryl SC 121 show especially good adhesion to plastics such as PVC, acrylic sheet, polycarbonate and polyester reinforced components.Primers and top-coats on metallic substrates. In view of its fast initial and through drying as well as its good water resistance Viacryl SC 121 is suitable for formulation one-coat paints and industrial primers. Coatings based on this product show good adhesion to steel, aluminium and zinc. For aluminium substrates a binder pigment ratio of about 1 : 2 should be selected. For steel a ratio of 1 : 1.5 is recommended. Decorative finishes are generally pigmented in ratios of 1 : 1 (binder/pigment) on solids.

Automotive finishes, in particular for metallics, especially for metallic basecoats (wet-on-wet process). Stoving enamels with good outdoor stability and colour retention, for general industrial purposes. Viacryl SC 303/65XB is used in combination with melamine and urea resins for the formulation of stoving enamels. The principal application area is automotive finishes, in particular metallics and clear coats for two-coat metallic systems, in combination with cellulose acetobutyrate for basecoats in two-coat metallics, but also industrial applications such as electric night storage heaters, fluorescent lamps, household appliances, boilers and drying boxes. In addition to their good adhesion, gloss, hardness, flexibility and corrosion resistance, paint films based on Viacryl SC 303 have very good stability to heat and to UV radiation. This is impressively evident in the case of top coats in two-coat metallic paints which, after prolonged outdoor exposure in Florida, show neither discolouration, cracking nor gloss impairment.