BECKOPOX EP 147W is a non-crystallizing, contains co-reacting emulsifiers. Primers/coatings on mineral and metallic substrates. Adhesives and water-washable jointing-compounds for tiles. BECKOPOX EP 147W is a non-crystallizing Bisphenol A/F liquid epoxy resin containing cross-linkable emulsifiers. Formulations cured with Beckopox EH 613w, EH 623w or EH 659w give hard films with high abrasion resistance, good corrosion protection and chemical resistance. To adjust viscosity a reduction with reactive diluents such as Beckopox EP 075 and EP 080 is possible. Beckopox EP 147w can be formulated together with the solid resin dispersions Beckopox EP 384w or EP 385w to improve their hardness adhesion to porous substrates.

BECKOPOX EP 386W/52WA is an internally plasticized solid resin-Type 1-dispersion with improved shear stability, e. g. for water reducible fast drying anticorrosion primers and coatings for plastics. BECKOPOX EP 386W/52WA is an internally plasticized type 1solid epoxy resin as aqueous dispersion. Formulated together with adequate curing agents such as e. g. Beckopox EH 613w or VEH 2188w it is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optimium corrosion protection it is recommended using 80 % of the stoichiometric curing agent not contain functional groups capable of reacting with epoxy groups.

BECKOPOX EP 387W/52WA is an internally plasticized solid resin-Type 1-dispersion with improved shear stability, e. g. for water reducible fast drying anticorrosion primers and coatings for plastics.BECKOPOX EP 387W/52WA is an internally plasticized type 1solid epoxy resin as aqueous dispersion. Formulated together with adequate curing agents such as e. g. Beckopox VEH 2188w/55WA it is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optimium corrosion protection it is recommended using 75 % of the stoichiometric curing agent quantity. Dispersion of pigments and fillers can be done in Beckopox EP 387w/52WA if the temperature does not exceed 40 °C. The formulated paint stability can be influenced by the additives used so that it is important to investigate their suitability thoroughly; such additves should not contain functional groups capable of reacting with epoxy groups.

BECKOPOX EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. Beckopox EM 2120w is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel. Due to the special character of Beckopox EM 2120w very fast drying coatings can be formulated. Pigments and extenders should be dispersed in a pigment paste since Beckopox EM 2120w does not possess sufficient shear stability. Organic solvents in the formulation should be added to the pigment paste or should be diluted with water before adding to EM 2120.