SETAL 199 SS-55 is a good drying properties, very good body, good colour, gloss retention and exterior durability. It is used as auto-repair enamels; Enamels for cars, trucks and buses; Enamels for tractors and agricultural equipment; Air-drying industrial enamels.

SETAL 142 XX-60 is very fast drying, good elasticity and yellowing resistance (also at elevated temperature), good adhesion on steel. It is used as fast drying industrial topcoats. Fast drying corrosion resistant primers. General purpose stoving enamels.

VIALKYD AC 290/70MPAC has an excellent compatibility characteristics with alkyd stoving paints, thermosetting acrylic paints, NC-lacquers, acid curing enamels, alkyd- or acrylic-isocyanate enamels. Grinding resin for pigment pastes. VIALKYD AC 290 has been designed as grinding resin in the formulation of pigment pastes which have full compatibility with alkyd stoving paints, thermosetting acrylic paints, nitrocellulose enamels and acid curing enamels, alkyd- or acrylics- polyiscoyanate combinations. The pastes can be reduced with the respertive resins and give paints with the performance of irrelevant modified basic paint properties. VIALKYD AC 290 has a balanced functionality and is fully integrated into the cured film. Therefore, it must be fully considered as resin component for reaction with amine resins, polyisocyanates, nitrocellulose systems and acid curing systems. Up to a resin proportion of 30 % of VIALKYD AC 290, the performance of the binder resin is not influenced adversely. VIALKYD AC 290 shows yellowing resistance up to 30 min / 200 °C and acts up favourably to top quality alkyd resins. Solvent resistance is not adversely affected. At low curing temperatures, VIALKYD AC 290 shows good crosslinking and is thus also suitable for quick stoving 80 °C enamels. Owing to the excellent performance of VIALKYD AC 290 in a variety of paint formulations and due to the fact that VIALKYD AC 290 does not subdue the characteristics of the main binder, paint preparation can be substantially rationalized with this new grinding medium.

SETAL 1606 BA-80 provides VOC compliant coatings (below 400 g/l) with high build and gloss, very good outdoor durability, good mechanical properties and good chemical resistance. It is used as two-component clearcoats and solid colour topcoats for vehicle refinish. Co-binder for combination with acrylic resins for two-component systems with reduced VOC.