SETAL AF 681 TB is in the formulation of decorative paints with excellent through-drying and good yellowing resistance. Also for flow coatings, DIY paints and air-drying coatings. General Setal A F 681 TB is a low-viscosity long-oil alkyd resin which is ideal for use in the formulation of DIY and decorative paints with excellent through-drying, a dust-free drying time of approx. 3.5 hours and a tack-free drying time of approx. 6 hours. Because of the relatively high acid value of Setal A F 681 TB, the following driers should be used: 0.04 % cobalt 6, 1.20 % zirconium 18 and 0.20 % calcium 4. The metal content is always calculated on the solvent-free resin. The use of these driers ensures good drying stability, even after prolonged storage. The addition of an anti-skinning agent is recommended. Aliphatic hydrocarbons are used to thin Setal A F 681 TBA. Higher boiling fractions are particularly suitable for adjusting the brushing viscosity. Standard pigments can be used to colour the formulations. The compatibility with alkaline pigments must always be tested in each individual case.

SETALUX 1182 XX-60 is in combination with aliphatic poly-isocyanates: excellent adhesion on metals such as aluminium, steel, zinc plated steel, stainless steel, excellent mechanical properties, good outdoor durability and quick drying. It is used in industrial lacquers with excellent elasticity and adhesion on difficult substrates and lacquers with good adhesion on a number of plastic substrates.

SETALUX 1151 XX-51 is in combination with aliphatic poly-isocyanates: excellent hardness, very good exterior durability, excellent mechanical properties, easy application facilities especially in airless-spray equipment and also under severe humidity conditions and low temperatures. It is used in enamels for road and rail transport. Industrial repair systems for train and tram units. Marine paints. Pre-fab buildings.

SETALUX 1184 SS-51 is an excellent fast drying, very good through hardening, good stackability, long potlife, good chemical resistance, excellent mar and stain resistance, good light fastness, good compatibility with poly-isocyanates. It is used as two-component lacquers and varnishes (especially for wood).