SETAL A F 681 TBA is in the formulation of decorative paints with excellent through-drying and good yellowing resistance. Also for flow coatings, DIY paints and air-drying coatings. General SETAL A F 681 TBA is low-viscosity long-oil alkyd resin which is ideal for use in the formulation of DIY and decorative paints with excellent through-drying, a dust-free drying time of approx. 3.5 hours and a tack-free drying time of approx. 6 hours. Because of the relatively high acid value of SETAL A F 681 TBA, the following driers should be used: 0.04 % colbalt 6, 1.20 % zirconium 18 and 0.20 % calcium 4. The metal content is always calculated on the solvent-free resin. The use of these driers ensures good drying stability, even after prolonged storage. The addition of an anti-skinning agent is recommended. Aliphatic hydrocarbons are used to thin SETAL A F 681 TBA. Higher boiling fractions are particularly suitable for adjusting the brushing viscosity. Standard pigments can be used to colour the formulations. The compatibility with alkaline pigments must always be tested in each individual case

SETALUX 1152 SS-60 is in combination with aliphatic poly-isocyanates: easy application, even under conditions of high humidity and low temperatures. High build and practically no yellowing under UV light, excellent exterior durability, good mechanical properties and chemical resistance. It is used as varnishes and clearcoats for drying at room temperature and also between 60 °C and 80 °C.

SETALUX 1187 XX-60 is in combination with aliphatic poly-isocyanates: excellent mechanical properties and chemical resistance, high-medium solids. In combination with Vestanat T 1890 S: high solid, high build, good gloss, excellent outdoor durability and light fastness, good mechanical properties. It is used as Industrial two-component coatings (in combination with poly-isocyanates such as Desmodur N) with excellent flexibility and mechanical properties. Mixing resin for two-component systems to optimize/improve the flexibility. Combination with Vestanat 1890 S.

SETALUX 1151 XX-51 is in combination with aliphatic poly-isocyanates: excellent hardness, very good exterior durability, excellent mechanical properties, easy application facilities especially in airless-spray equipment and also under severe humidity conditions and low temperatures. It is used in enamels for road and rail transport. Industrial repair systems for train and tram units. Marine paints. Pre-fab buildings.