Air and forced drying industrial coatings with fast drying and high hardness. Specialty coatings for glass, precious metals and plastics. It is used as air drying coating systems Viacryl SC 200/40X is mainly used for fast drying industrial paints. The dried films are noted for very high hardness and excellent resistance poperties e.g. against water and diluted acids. For air-dried systems (tack-free in 15 minutes) Viacryl SC 200 can be used alone or in combination with plasticizers. Such systems compared with systems using Viacryl SC 200 as sole binder show better pigment wetting and flexibility. The use of plasticizers will, however have a negative influence on alkali resistance. The compatibility of Viacryl SC 200 with other coatings ingredients should be controlled from time to time. Stoving enamels For stoving systems Viacryl SC 200 is generally formulated with plasticizers and urea or melamine resins. The following ratios habe proven successful: Viacryl SC 200 : amino resin : plasticizer = 70 : 15 : 15 or 65 : 15 : 20 (on solids). Compared with air drying systems such systems show after curing (e. g. 30 min/140 °C) improved flexibility, hardness, impact and chip resistance. Specialty coatings For air drying as well as stoving systems Viacryl SC 200 can be used to formulate specialty coatings with good adhesion to glass, precious metals, and various plastics such as ABS and polyphenylene oxide (PPO).

VIACRYL SC 121/60X is a sole binder for road-marking paints. Fast drying primers and top coats for nonferrous metal and plastic substrates.It is used as road-marking paints Viacryl SC 121/60LG was especially developed as sole binder for road-marking paints. Road-marking paints based on this copolymer have excellent adhesion and abrasion resistance, permanent flexibility as well as good whiteness retention. It is, however, recommended to first conduct a trial application under the given conditions to ensure suitability. Coating of plastics One-coat paints based on Viacryl SC 121 show especially good adhesion to plastics such as PVC, acrylic sheet, polycarbonate and polyester reinforced components.Primers and top-coats on metallic substrates. In view of its fast initial and through drying as well as its good water resistance Viacryl SC 121 is suitable for formulation one-coat paints and industrial primers. Coatings based on this product show good adhesion to steel, aluminium and zinc. For aluminium substrates a binder pigment ratio of about 1 : 2 should be selected. For steel a ratio of 1 : 1.5 is recommended. Decorative finishes are generally pigmented in ratios of 1 : 1 (binder/pigment) on solids.

Automotive finishes, in particular for metallics, especially for metallic basecoats (wet-on-wet process). Stoving enamels with good outdoor stability and colour retention, for general industrial purposes. Viacryl SC 303/65XB is used in combination with melamine and urea resins for the formulation of stoving enamels. The principal application area is automotive finishes, in particular metallics and clear coats for two-coat metallic systems, in combination with cellulose acetobutyrate for basecoats in two-coat metallics, but also industrial applications such as electric night storage heaters, fluorescent lamps, household appliances, boilers and drying boxes. In addition to their good adhesion, gloss, hardness, flexibility and corrosion resistance, paint films based on Viacryl SC 303 have very good stability to heat and to UV radiation. This is impressively evident in the case of top coats in two-coat metallic paints which, after prolonged outdoor exposure in Florida, show neither discolouration, cracking nor gloss impairment.

MACRYNAL VSM 2155/60EPAC, in combination with aliphatic polyisocyanates, pre-eminently with Desmodur N 75 (Covestro), produces two-pack clearcoats and pigmented topcoats with excellent chemical resistance for the industrial acquer sector. Macrynal VSM 2155 is especially suited for coatings on aeroplanes or military vehicles.