VIALKYD AM 764/70WS has an extremely good resistance to weather and water. Easy to brush, high build. Radiant brilliance, good gloss retention. Exterior wood paints, and wood stains. Clear varnishes, yacht varnishes. Anticorrosive systems. VIALKYD AM 764 is designed as sole binder for the formulation of top grade wood enamels and stains. High build trade paints can be produced from VIALKYD AM 764 in conjunction with non-yellowing alkyds. Clear varnishes and glazes (exterior wood stains). VIALKYD AM 764 excels in weather resistance and thus recommends itself as sole binder for clear varnishes, wood stains and glazes. Furthermore, VIALKYD AM 764 shows excellent wood penetration and big ease of application. Clear varnishes on VIALKYD AM 764 exhibit good gloss retention and have no tendency to cracking, owing to durable flexibility. Yacht varnishes Besides superior weather resistance VIALKYD AM 764 exhibits excellent water resistance. These properties allow the formulation of varnishes subject to continued impact of UV-light and water, such as for yachts and other boats. Trade paints and industrial paints VIALKYD AM 764 imparts excellent build and gloss to trade paints. Owing to its yellowing tendency, for white paints it is used in conjunction with non-yellowing alkyd resins. As combination partner VIALKYD AM 764 markedly improves brushability and flow. Metal primers and finishes can be also formulated from VIALKYD AM 764. These paints are used in cases where requirements regarding weather resistance and gloss retention are high.

VIALKYD AC 290/70MPAC has an excellent compatibility characteristics with alkyd stoving paints, thermosetting acrylic paints, NC-lacquers, acid curing enamels, alkyd- or acrylic-isocyanate enamels. Grinding resin for pigment pastes. VIALKYD AC 290 has been designed as grinding resin in the formulation of pigment pastes which have full compatibility with alkyd stoving paints, thermosetting acrylic paints, nitrocellulose enamels and acid curing enamels, alkyd- or acrylics- polyiscoyanate combinations. The pastes can be reduced with the respertive resins and give paints with the performance of irrelevant modified basic paint properties. VIALKYD AC 290 has a balanced functionality and is fully integrated into the cured film. Therefore, it must be fully considered as resin component for reaction with amine resins, polyisocyanates, nitrocellulose systems and acid curing systems. Up to a resin proportion of 30 % of VIALKYD AC 290, the performance of the binder resin is not influenced adversely. VIALKYD AC 290 shows yellowing resistance up to 30 min / 200 °C and acts up favourably to top quality alkyd resins. Solvent resistance is not adversely affected. At low curing temperatures, VIALKYD AC 290 shows good crosslinking and is thus also suitable for quick stoving 80 °C enamels. Owing to the excellent performance of VIALKYD AC 290 in a variety of paint formulations and due to the fact that VIALKYD AC 290 does not subdue the characteristics of the main binder, paint preparation can be substantially rationalized with this new grinding medium.

SETAL A F 48 TB/X is in the formulation of high-quality, air and force-drying industrial coatings, radiator paints, special effect finishes, primers and DIY paints. SETAL A F 48 TB/X is the standard binder for air and force-drying industrial coatings. Itsmain characteristics are its rapid drying (four-hour coating), good through-drying and curing to formdefect-free films, even in thick coats. It also yields good film properties - whiteness, resistance to yellowing, gloss and gloss retention, brilliance, body, flow and weather stability. SETAL A F 48 TB/X can be used in primers as well as in all types of top coats and one-coat finishes. Coatings based on SETAL A F 48 TB/X can be applied using conventional methods such as spraying, dipping and flow coating. A combination of 0.1 % Ca/0.06 % Co/0.2 % Zn and 0.2 % Zr-octoate, calculated as metal on solvent-free resin, has proved to be a useful mixture for speeding up the drying. Combination with long-oil alkyd resins is necessary for DIY paints applied by brushing.

SETAL A F 26 X is in the formulation of primers, knifing fillers, primer surfacers, top coats and dipping paints and flow coatings for radiators. Coatings based on SETAL A F 26 X are characterised by their very rapid drying and curing, high resistance to yellowing, weather stability and good anticorrosion properties. The use of alkaline pigments such as zinc phosphate, zinc oxide and aluminium triphosphate make it possible to optimize the anticorrosion properties of primers based on SETAL A F 26 X. Knifing fillers and primer surfacers applied in thickness of up to 200 μm can be dry-sanded within 1 hour. Combination with aminoplastic resins is recommended when formulating force-drying coatings.