SETAL A F 48 TB/X is in the formulation of high-quality, air and force-drying industrial coatings, radiator paints, special effect finishes, primers and DIY paints. SETAL A F 48 TB/X is the standard binder for air and force-drying industrial coatings. Itsmain characteristics are its rapid drying (four-hour coating), good through-drying and curing to formdefect-free films, even in thick coats. It also yields good film properties - whiteness, resistance to yellowing, gloss and gloss retention, brilliance, body, flow and weather stability. SETAL A F 48 TB/X can be used in primers as well as in all types of top coats and one-coat finishes. Coatings based on SETAL A F 48 TB/X can be applied using conventional methods such as spraying, dipping and flow coating. A combination of 0.1 % Ca/0.06 % Co/0.2 % Zn and 0.2 % Zr-octoate, calculated as metal on solvent-free resin, has proved to be a useful mixture for speeding up the drying. Combination with long-oil alkyd resins is necessary for DIY paints applied by brushing.

SETAL AF 681 TB is in the formulation of decorative paints with excellent through-drying and good yellowing resistance. Also for flow coatings, DIY paints and air-drying coatings. General Setal A F 681 TB is a low-viscosity long-oil alkyd resin which is ideal for use in the formulation of DIY and decorative paints with excellent through-drying, a dust-free drying time of approx. 3.5 hours and a tack-free drying time of approx. 6 hours. Because of the relatively high acid value of Setal A F 681 TB, the following driers should be used: 0.04 % cobalt 6, 1.20 % zirconium 18 and 0.20 % calcium 4. The metal content is always calculated on the solvent-free resin. The use of these driers ensures good drying stability, even after prolonged storage. The addition of an anti-skinning agent is recommended. Aliphatic hydrocarbons are used to thin Setal A F 681 TBA. Higher boiling fractions are particularly suitable for adjusting the brushing viscosity. Standard pigments can be used to colour the formulations. The compatibility with alkaline pigments must always be tested in each individual case.

MACRYNAL SM 510N/60LG is a high gloss, very good mechanical properties, excellent outdoor stability and chemical resistance. In combination with polyisocyanates for at room temperature drying or forced drying two-pack systems for the industrial lacquer sector. In combination with aliphaticpolyisocyanates Macrynal SM 510 is recommended for at room temperature drying or forced drying two-pack systems. The principal application is the industrial lacquer sector. Coatings based on Macrynal SM 510 provide very good solvent and chemical resistance as well as excellent outdoor stability.

SETALUX 1903 BA-75 provides VOC compliant coatings (420 g/l) with high build and gloss, good mechanical properties, good chemical resistance and good outdoor durability (in combination with aliphatic poly-isocyanates). It is used as two-component clearcoats and solid colours for vehicle refinish. Two-component industrial topcoats.