As a flow- and pumpable paste ADDITOL XL 280 prevents settling and improves wetting of pigments in solvent- and waterborne paints systems. ADDITOL XL 280 improves paint stability. ADDITOL XL 280 is a highly effective additive for all industrial finishes. The easy handling of this material, owing to its favourable rheological properties, saves material and manufacture costs and simplifies the dosage. Difficult dispersible pigments and extenders are more easily and rapidly wetted and stabilized by the action of ADDITOL XL 280. The rheological properties of the coating are favourably affected leading to less tendency to run-off on vertical surfaces and improving edge coverage in dip coating.

ADDITOL XW 395 Enhances surface properties of the films and prevents film defects like insufficient wetting and structured surfaces owing to impurities. ADDITOL XW 395 is an additive specially designed for Resydrol paint systems and, compatibility provided, for other waterborne paint systems. Considering the levels and restrictions given below ADDITOL XW 395 can be used in any water dilutable paint with the exception of electrodeposition paints. ADDITOL XW 395 prevents film defects, such as craters and pin holes or can remedy poor wetting owing to impurities brought into the aqueous paint during preperation or processing. Insufficiently degreased metal is the main cause for such troubles. With ADDITOL XW 395 wetting problems are avoided. It should be noted that film defects arising from silicone oils in many cases cannot be prevented with ADDITOL XW 395. ADDITOL XW 395 prevents floating of pigments, striation, orange peel, etc. and improves the film surface in general. ADDITOL XW 395 at the recommended levels, does not impair the physical properties of the stoved film. In primers ADDITOL XW 395 may cause a certain degree of gloss. Additions of ADDITOL XW 395 may adversely influence the effect of antifoaming agents; on the other hand, it can remedy infavourable effects of the antifoams. In aqueous paints for spray application ADDITOL XW 395 can be used without precautions, while in dipping or flow coating paints ADDITOL XW 395 must be carefully balanced with the antifoams normally present.

ADDITOL XW 6555 meet legislation & regulation requirements and is a ready to use combination drier designed to have excellent compatibility and fast incorporation in all waterborne and solvent borne alkyd paints. The balanced non-hazardous metal combination results in very good through drying performances combined with good surface drying. ADDITOL XW 6555 can be used as drier for all water?dilutable, solvent borne and high solid oxidative drying alkyd resins. The innovative emulsification technology employed enables a labeling free use in high quality architectural and protective coating applications using alkyds.

DAOTAN VTW 6462/36WA is a solvent-free self-crosslinking acrylated polyurethane dispersion with very good wetting properties, curing rapidly to give clear crack-free films. Daotan VTW 6462 is stable to applied shear forces and has good pigment compatibility. Cured films show good abrasion resistance and have good resistance to household detergents. This polyurethane emulsion was designed to formulate coating systems for various plastics such as ABS, PA, rigid PVC, flexible PVC and PMMA. Aqueous primers and base coats can be formulated. The adhesion to any plastic substrate to be coated should first be carefully examined.