ADDITOL® VXW 6208/60 is a dispersing and wetting additive for inorganic and organic pigments and extenders. Polymeric non-ionic dispersing and wetting additive for solvent-borne. Additol VXW 6208/60 is used for the production of binder-free pigment pastes and for tinting base colours. Additol VXW 6208/60 is mainly applied as wetting agent in solvent-free and solvent-borne.

ADDITOL VXL 4930 may be used in all solvent-containing and water-dilutable paint systems. It promotes the spray dust absorption, prevents orange peel and increases scratch resistance. ADDITOL VXL 4930 is effective at low concentrations and at the correct dosage, does not adversely affect intercoat adhesion. Blistering, cratering and floating in pigment blends are effectively prevented. It does not stabilize the foam during paint production and application. The substrate wetting is advanced.ADDITOL VXL 4930 is used primarily in industrial stoving/baking paints and 2K PUR paint systems.

ADDITOL VXW 4940N is the lead-free combination drier. ADDITOL VXW 4940N produces in water-dilutable alkyd resin paints a quick set-drying in connection with an even trough-drying. ADDITOL VXW 4940N contains all metals which are necessary for an utmost oxidative drying. Adding any other drier is not necessary. The lead-free combination drier ADDITOL VXW 4940N produces in water-dilutable alkyd resin paints a quick set-drying in connection with an even trough-drying. ADDITOL VXW 4940N contains all metals which are necessary for an utmost oxidative drying. Adding any other drier is not necessary. ADDITOL VXW 4940N can be used as drier for all water-dilutable, oxidatively drying alkyd resin paints. Especially recommendable is the usage of ADDITOL VXW 4940N for drying alkyd resin emulsions, e. g. Resydrol AY 586w, Resydrol AY 466w, Resydrol AZ 436w, because contrary to conventional driers a homogeneous distribution is provided and therefore a quick drying and most of all good drying stability can be achieved. ADDITOL VXW 4940N can also be used for acryl-alkyd hybrid systems.

ADDITOL VXW 6393 was designed to destroy foam generated in emulsion wall-paints, based on PVAC, PVC, acrylics and their mixed polymers. Prior to using ADDITOL VXW 6393 it should be thoroughly agitated since it is prone to sediment fall out. When examining its rheology it is necessary to wait an additional 5 minutes. ADDITOL VXW 6393 can be easily emulsified and worked into the designated product.