ADDITOL VXW 6235 gives rapid foam retardant results, which remains effective during storage of the aqueous powder coating. The flow property of the coating is not effected. Pin hole free films are obtained. ADDITOL VXW 6235 it is mainly recommended for powder coating materials to be used in aqueous systems eg: Emulsion paints, 2-component epoxy systems, Plasterwork, Filling compounds and scalants, Flooring compounds, Adhesives and Good effects are also seen in liquid non glossy water reducible coating systems.

ADDITOL VXW 4926 is a rapid defoaming or air release.It allows high film thickness of stoving paints, without cissing. Also suited for combinations of dispersions with water dilutable synthetic resins.ADDITOL VXW 4926 is a surface active additive for water dilutable paints. Particularly with spray application cissing on curing of the paint is prevented or may appear only with higher film thickness. Since ADDITOL VXW 4926 is not dilutable with water, it should be incorporated with great care. The dosed range is between 2 % and 15 % for 100 % binder solids. The optimum quantity should be determined in individual tests.

ADDITOL VXW 6386 Easy emulsifable defoamer, espacially for high quality waterborne sytems, at there conventionally mineral-oil or silicon based defoamers cause decrease the surface quallity of the film (orange peel, craters). At forced and stoving drying paints it can observed a higher cissing free filmthickness. ADDITOL VXW 6386 is qualified for following waterborne systems: stoving enamel based on alkyd- or acrylic-melamine resin, 2 component acrylic-isocyanate paints, paints based on waterdilutable alkyd resin and gloss and semigloss dispersion paint.

ADDITOL XL 122 is a paint additive to enhance mar resistance and slip and to improve flow and levelling in air drying and stoving paints. ADDITOL XL 122 is a silicone type paint additive. It enhances the resistance of solventborne paints to mechanical attack by increasing the slip of the paint surface. Furthermore, ADDITOL XL 122 improves levelling and flow prevents surface defects like orange peel and thus in general contributes to the formation of flawless film surfaces with enhanced sheen. In coil coating and can coating paints as well as in furniture enamels ADDITOL XL 122 is used to prevent blocking also. ADDITOL XL 122 can be employed with air drying alkyd resin paints, alkyd resin stoving paints, thermosetting acrylic paints, nitrocellulose lacquers, acid curing paints, alkyd-isocyanate paints or acrylics, isocyanate enamels. Paints containing ADDITOL XL 122 can be recoated in general without additional treatment of the surface. The effect of ADDITOL XL 122 varies with the formulation of the paint. A level of 0.05 to 0.3 % of ADDITOL XL 122 on the finished paint may serve as a guide.