BECKOCOAT PU 428/51XMPAC is a rapid curing. Radiant brilliance. Superior abrasion resistance. Outstanding impact resistance, excellent adhesion. Floor sealers, wood coating, concrete impregnation. Crosslinker for alkyd resins in two-component systems.The extreme abrasion resistance, impact resistance, and chemical resistance make Beckocoat PU 428 films cured with the action of air humidity an excellent sealer and impregnation medium for concrete, a binder for non-slip coatings, for concrete coatings resistant to fuel oil and abrasion, for instance in garages, or for floorings and coatings for walls and ceilings in laboratories, chemical factories, etc. The films cure to radiant brilliance and can also be recommended for wooden floors subject to heavy wear like in bowling alleys, roller skating rinks, dancing halls, gymnasiums and schools. Beckocoat PU 428 has also proved an ideal vehicle for coating sports articles like spears, bowling pins, golf balls, bats, hockey sticks, tennis rackets, etc. In exterior use, Beckocoat PU 428 will lose gloss and will yellow. Weather resistance and gloss retention can be enhanced through coemploying alkyd resins like VIALKYD AR 408.

ESACOTE PU 825 is a resin specifically designed for the formulation of primer or inks for plastic films.

LACPER 4101 is an aqueous oil modified polyurethane dispersion. It has good wetting ability on wood substrate, also has good film building, film clarity and wood warming effect. When used in water base 1K or 2K coatings, it shows very fast film hardness development, it also has good adhesion on different substrate such as PU/PE/UV/melamine. It has good stability and compa- tibility with ethanol and dyes when used in shading stain.The product contains no solvent,APEO and Organotin. Less than 1% TEA is used as neutralizing agent. Bactericide: CMIT:MIT=3:1 12 ppm, MIT: 100ppm.

AQUOLIN 269 is a water dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). In combination with waterborne polyurethane, polyacrylate, etc., it can be used for water-borne coatings and adhesives. After addition of Aquolin® 269, the ready-to-use mixture must be used within the pot life.