AXILAT SA 502 is an anti shrinkage admixture. AXILAT SA 502 is a 100% amorphous “flash” alumina with a very high surface area. It is a set accelerator and can be used as an anti-shrinkage admixture for Portland cement.

ADDITOL XL 102 is used to improve the effectiveness of paint removers containing paraffine and wax. Post treatment with organic solvents is not necessary.

ADDITOL VXW 6208 is a dispersing and wetting additive for inorganic and organic pigments and extenders. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high-filled paint systems. It isn't compatible with binders which are dissolved in aliphatic hydrocarbons. ADDITOL VXW 6208 is used for the production of binder-free pigment pastes and for tinting base colours. ADDITOL VXW 6208/60 is mainly applied as wetting agent in solvent-free and solvent-borne two pack-epoxy-systems.

ADDITOL VXW 6386 Easy emulsifable defoamer, espacially for high quality waterborne sytems, at there conventionally mineral-oil or silicon based defoamers cause decrease the surface quallity of the film (orange peel, craters). At forced and stoving drying paints it can observed a higher cissing free filmthickness. ADDITOL VXW 6386 is qualified for following waterborne systems: stoving enamel based on alkyd- or acrylic-melamine resin, 2 component acrylic-isocyanate paints, paints based on waterdilutable alkyd resin and gloss and semigloss dispersion paint.