SETAL 1201 SM-50 is Good hardness, fast drying and abrasion resistant. It is used as decorative varnishes.

SETAL A F 48 TB/X is in the formulation of high-quality, air and force-drying industrial coatings, radiator paints, special effect finishes, primers and DIY paints. SETAL A F 48 TB/X is the standard binder for air and force-drying industrial coatings. Itsmain characteristics are its rapid drying (four-hour coating), good through-drying and curing to formdefect-free films, even in thick coats. It also yields good film properties - whiteness, resistance to yellowing, gloss and gloss retention, brilliance, body, flow and weather stability. SETAL A F 48 TB/X can be used in primers as well as in all types of top coats and one-coat finishes. Coatings based on SETAL A F 48 TB/X can be applied using conventional methods such as spraying, dipping and flow coating. A combination of 0.1 % Ca/0.06 % Co/0.2 % Zn and 0.2 % Zr-octoate, calculated as metal on solvent-free resin, has proved to be a useful mixture for speeding up the drying. Combination with long-oil alkyd resins is necessary for DIY paints applied by brushing.

SETAL A F 26 X is in the formulation of primers, knifing fillers, primer surfacers, top coats and dipping paints and flow coatings for radiators. Coatings based on SETAL A F 26 X are characterised by their very rapid drying and curing, high resistance to yellowing, weather stability and good anticorrosion properties. The use of alkaline pigments such as zinc phosphate, zinc oxide and aluminium triphosphate make it possible to optimize the anticorrosion properties of primers based on SETAL A F 26 X. Knifing fillers and primer surfacers applied in thickness of up to 200 μm can be dry-sanded within 1 hour. Combination with aminoplastic resins is recommended when formulating force-drying coatings.

ROSKYDAL K 65 is a binder for highly filled, coarse and fine knifing fillers for use on metal, wood and mineral substrates. Fillers based on ROSKYDAL K 65 cure fully when applied in both thin and thick coats. They can be made harder by the addition of, for example, ROSKYDAL K 14 M or ROSKYDAL K 36. Formulation Combinations of talc, dolomite/calcite and baryteswith lowiron content have proved suitable as extenders, with talc as the main component because it improves the adhesion to the substrate.