Specialty Chemicals

SETATHANE D 1155 is applied in combination with e.g. SETATHANE D 1145 and 1150 in the formulation of coatings SETATHANE D 1155 is not recommended as a sole binder. Because of its low viscosity, SETATHANE D 1155 is especially suitable for combination with SETATHANE D 1145 and 1150 in the formulation of solventfree, self-leveling polyurethane coatings of low viscosity. Desmodur® VL or VL 50 are normally used as hardener.

SETAQUA ECO 6794 is a fine particle size, self-crosslinking acrylic dispersion with improved low temperature flexibility, combined with good flow and levelling properties and with good block and chemical resistance. It is used as decorative trim paints for interior and exterior applications. Air-drying exterior pigmented and non pigmented wood finishes for the joinery industry.

SETAQUA X 11712 is a room temperature drying (by air-oxidation), fatty acid modified waterborne urethane dispersion. SETAQUA X 11712 is NMP-free. It is non-yellowing and has good weather stability. When formulating with SETAQUA X 11712, a suitable metal drier combination must be used (for e.g Nuodex Combi LS, 0.10% on solid binder). It is used as versatile binder that can be used in waterborne air- and force-drying topcoats and primers. Can be used on wood and metal substrates. Also suitable for mono-coats and direct to-metal coatings.

SETATHANE D 1145 is applied in the formulation of hard and tough coatings and synthetic resin mortars.It is used in combination with other polyols such as SETATHANE D 1150 and crosslinked with Desmodur VL, SETATHANE D 1145 is suitable for use in the formulation of two-component coatings. The main applications are in the construction industry. Curing yields hard to tough but flexible films which are resistant to abrasion and chemicals. In combination with other polyols such as SETATHANE D 1150 and crosslinked with Desmodur VL, SETATHANE D 1145 is suitable for use in the formulation of two-component coatings. The main applications are in the construction industry. Curing yields hard to tough but flexible films which are resistant to abrasion and chemicals.