SETAL A F 48 TB/X is in the formulation of high-quality, air and force-drying industrial coatings, radiator paints, special effect finishes, primers and DIY paints. SETAL A F 48 TB/X is the standard binder for air and force-drying industrial coatings. Itsmain characteristics are its rapid drying (four-hour coating), good through-drying and curing to formdefect-free films, even in thick coats. It also yields good film properties - whiteness, resistance to yellowing, gloss and gloss retention, brilliance, body, flow and weather stability. SETAL A F 48 TB/X can be used in primers as well as in all types of top coats and one-coat finishes. Coatings based on SETAL A F 48 TB/X can be applied using conventional methods such as spraying, dipping and flow coating. A combination of 0.1 % Ca/0.06 % Co/0.2 % Zn and 0.2 % Zr-octoate, calculated as metal on solvent-free resin, has proved to be a useful mixture for speeding up the drying. Combination with long-oil alkyd resins is necessary for DIY paints applied by brushing.

SETALUX 1182 XX-60 is in combination with aliphatic poly-isocyanates: excellent adhesion on metals such as aluminium, steel, zinc plated steel, stainless steel, excellent mechanical properties, good outdoor durability and quick drying. It is used in industrial lacquers with excellent elasticity and adhesion on difficult substrates and lacquers with good adhesion on a number of plastic substrates.

SETALUX 1151 XX-51 is in combination with aliphatic poly-isocyanates: excellent hardness, very good exterior durability, excellent mechanical properties, easy application facilities especially in airless-spray equipment and also under severe humidity conditions and low temperatures. It is used in enamels for road and rail transport. Industrial repair systems for train and tram units. Marine paints. Pre-fab buildings.

SETALUX 1184 SS-51 is an excellent fast drying, very good through hardening, good stackability, long potlife, good chemical resistance, excellent mar and stain resistance, good light fastness, good compatibility with poly-isocyanates. It is used as two-component lacquers and varnishes (especially for wood).