ADDITOL VXW 4926 is a rapid defoaming or air release.It allows high film thickness of stoving paints, without cissing. Also suited for combinations of dispersions with water dilutable synthetic resins.ADDITOL VXW 4926 is a surface active additive for water dilutable paints. Particularly with spray application cissing on curing of the paint is prevented or may appear only with higher film thickness. Since ADDITOL VXW 4926 is not dilutable with water, it should be incorporated with great care. The dosed range is between 2 % and 15 % for 100 % binder solids. The optimum quantity should be determined in individual tests.

ADDITOL VXW 4973 is an easily emulsifiable defoamer with very good incorporating ability. It is suited for defoaming of coarse-disperse to fine-disperse (plastic) dispersions on the basis of PVAC, PVC, acrylates and their copolymerisates. Also low-viscous products may be defoamed with ADDITOL VXW 4973.

As a flow- and pumpable paste ADDITOL XL 280 prevents settling and improves wetting of pigments in solvent- and waterborne paints systems. ADDITOL XL 280 improves paint stability. ADDITOL XL 280 is a highly effective additive for all industrial finishes. The easy handling of this material, owing to its favourable rheological properties, saves material and manufacture costs and simplifies the dosage. Difficult dispersible pigments and extenders are more easily and rapidly wetted and stabilized by the action of ADDITOL XL 280. The rheological properties of the coating are favourably affected leading to less tendency to run-off on vertical surfaces and improving edge coverage in dip coating.

BECKOPOX EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. Beckopox EM 2120w is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel. Due to the special character of Beckopox EM 2120w very fast drying coatings can be formulated. Pigments and extenders should be dispersed in a pigment paste since Beckopox EM 2120w does not possess sufficient shear stability. Organic solvents in the formulation should be added to the pigment paste or should be diluted with water before adding to EM 2120.