Hóa chất đặc biệt

ADDITOL VXW 6386 Easy emulsifable defoamer, espacially for high quality waterborne sytems, at there conventionally mineral-oil or silicon based defoamers cause decrease the surface quallity of the film (orange peel, craters). At forced and stoving drying paints it can observed a higher cissing free filmthickness. ADDITOL VXW 6386 is qualified for following waterborne systems: stoving enamel based on alkyd- or acrylic-melamine resin, 2 component acrylic-isocyanate paints, paints based on waterdilutable alkyd resin and gloss and semigloss dispersion paint.

ADDITOL VXW 4940N is the lead-free combination drier. ADDITOL VXW 4940N produces in water-dilutable alkyd resin paints a quick set-drying in connection with an even trough-drying. ADDITOL VXW 4940N contains all metals which are necessary for an utmost oxidative drying. Adding any other drier is not necessary. The lead-free combination drier ADDITOL VXW 4940N produces in water-dilutable alkyd resin paints a quick set-drying in connection with an even trough-drying. ADDITOL VXW 4940N contains all metals which are necessary for an utmost oxidative drying. Adding any other drier is not necessary. ADDITOL VXW 4940N can be used as drier for all water-dilutable, oxidatively drying alkyd resin paints. Especially recommendable is the usage of ADDITOL VXW 4940N for drying alkyd resin emulsions, e. g. Resydrol AY 586w, Resydrol AY 466w, Resydrol AZ 436w, because contrary to conventional driers a homogeneous distribution is provided and therefore a quick drying and most of all good drying stability can be achieved. ADDITOL VXW 4940N can also be used for acryl-alkyd hybrid systems.

ADDITOL XL 6507 product, serving for trial purposes only. Deviations which might occur during transfer into manufacturing in a commercial scale are possible and do not constitute any material defect. ADDITOL XL 6507 is a solution of defoaming polymers without siliconeSuggested applications are - industrial coatings - 2 comp. acrylic/isocyanate systems - corrosion protection paints based on epoxy resins - wood and furniture coatings based on unsaturated polyesters and UV-curing systems In non-pigmented systems over dark surfaces, a slight turbidity, depending on the added amount, may occur.

SETAL 1201 SM-50 is Good hardness, fast drying and abrasion resistant. It is used as decorative varnishes.