Hóa chất đặc biệt

ARONIX M-8060 is a mulitfunctional polyester used as an oligomer for UV cure paints and adhesives. ARONIX is a brand name for special monomers and oligomers and includes special acrylates, urethane acrylates, and polyester acrylates for radical curing method.

ARON OXETANE, OXT221 is a 4 membered cyclic ether compounds used as cationic monomers for UV curing systems. Oxetane compounds are four-membered cyclic ethers that are similar to epoxy compounds, but with a higher rate of polymerisation and the cured materials exhibiting superior physical properties. Oxetane Resins can provide a wide range of hardness and flexibility, coupled with low shrinkage rates.

ARON OXETANE OXT-212 is a 4 membered cyclic ether compounds used as cationic monomers for UV curing systems. Oxetane compounds are four-membered cyclic ethers that are similar to epoxy compounds, but with a higher rate of polymerisation and the cured materials exhibiting superior physical properties. Oxetane Resins can provide a wide range of hardness and flexibility, coupled with low shrinkage rates.

SETAL A F 681 TBA is in the formulation of decorative paints with excellent through-drying and good yellowing resistance. Also for flow coatings, DIY paints and air-drying coatings. General SETAL A F 681 TBA is low-viscosity long-oil alkyd resin which is ideal for use in the formulation of DIY and decorative paints with excellent through-drying, a dust-free drying time of approx. 3.5 hours and a tack-free drying time of approx. 6 hours. Because of the relatively high acid value of SETAL A F 681 TBA, the following driers should be used: 0.04 % colbalt 6, 1.20 % zirconium 18 and 0.20 % calcium 4. The metal content is always calculated on the solvent-free resin. The use of these driers ensures good drying stability, even after prolonged storage. The addition of an anti-skinning agent is recommended. Aliphatic hydrocarbons are used to thin SETAL A F 681 TBA. Higher boiling fractions are particularly suitable for adjusting the brushing viscosity. Standard pigments can be used to colour the formulations. The compatibility with alkaline pigments must always be tested in each individual case