Hóa chất đặc biệt

ADDITOL VXL 4930 may be used in all solvent-containing and water-dilutable paint systems. It promotes the spray dust absorption, prevents orange peel and increases scratch resistance. ADDITOL VXL 4930 is effective at low concentrations and at the correct dosage, does not adversely affect intercoat adhesion. Blistering, cratering and floating in pigment blends are effectively prevented. It does not stabilize the foam during paint production and application. The substrate wetting is advanced.ADDITOL VXL 4930 is used primarily in industrial stoving/baking paints and 2K PUR paint systems.

ADDITOL VXW 6393 was designed to destroy foam generated in emulsion wall-paints, based on PVAC, PVC, acrylics and their mixed polymers. Prior to using ADDITOL VXW 6393 it should be thoroughly agitated since it is prone to sediment fall out. When examining its rheology it is necessary to wait an additional 5 minutes. ADDITOL VXW 6393 can be easily emulsified and worked into the designated product.

ADDITOL XL 6568 is used for the formulation of stripping enamels, release agents and temporary corrosion protection. ADDITOL XL 6568 is added to stripping enamels as anti adhesion promotor. Coatings of this nature give temporary protection against mechanical attack and corrosion to various substrates. Such coatings can easily be pealed off later. ADDITOL XL 6568 can be used in solvent based as well as in aqueous systems. Suitable binders for solvent based systems are the Hostaflex grades CM 150 and CM 133 as well as the Mowital grades B30HH and B60H. To formulate aqueous systems, acrylic dispersions like Ucecryl B 3022 are recommended. While solvent based release coatings can easily be removed from metallic substrates aqueous systems based on styrene acrylate dispersions can also be removed from glass, pottery, wood and plastics. For formulating systems with high film strength aqueous systems are more suitable than solvent based systems.

ADDITOL XW 376 can be used in most waterborne emulsion paints and adhesives, and in synthetic resin-bound renderings. Good storage stability even at elevated temperatures. ADDITOL XW 376 is effective in large to fine particle size dispersions based on polyvinyl acetate, PVC, acrylates and their copolymers as well as alkyd resin emulsions. It is easily emulsified and also incorporated in low viscosity systems. ADDITOL XW 376 is equally useful in deaeration during pigment grinding and in the filling process. It is shear stable and alkali resistant up to pH = 13.