Sơn & Sơn phủ

NPEL-128E is a high purity liquid resin, which is manufactured from bisphenol-A and epichlorohydrin. It is recognized as standard form which variations have been developed. Cured NPEL-128E always offers quality and high purity properties in applications, such as maximum mechanical strength, good chemical resistance and excellent heat resistance, etc.

EPOXY NPEL 127E is an undiluted resin with a lower viscosity than NPEL-128E but providing similar properties after cure. Cured with polyamine or polyamide, it offers quality and high purity properties in applications, such as maximum mechanical strength, good chemical resistance and excellent heat resistance, etc. Because its low chloride content, NPEL-127E is more suitable for electronic application.

NPEK-114L is a C12-C14 aliphatic glycidyl ether diluted liquid resin, which has low viscosity to processing easily. It is excellent than conventionally diluted epoxy resins as better filler acceptance, reduced odor, lower vapor pressure and less potential for handing hazards. Cured NPEL-114L provides good levels of chemical resistance and physical properties, such as aliphatic polyamines and polyamides, usually their curing temperature are at room temperature.

YD-128 is a liquid type standard Epoxy Resin derived from Bisphenol-A. It has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, YD-128 is generally used in many fields. YD-128 is the most standard liquid resin for general use.