Sơn & Sơn phủ

NPEF-170 is a BPF type epoxy resin, it provides low viscosity / high flow characteristics suited for use in non-solvent (100% solid) applications for coatings, molding etc. Flexibility and adhesive strength is also increased making NPEF-170 resin excellent for use in civil engineering, electrical insulation materials.

EPOXY NPEF 180 is a Bisphenol F epoxy resin blended with Bisphenol A epoxy resin. The low viscosity allows high filler loading and gives good wetting effect. NPEF-180 can be blended with common epoxy resins. Cured with polyamines or polyamides at ambient condition, it provides good levels of chemical resistance and physical properties.

EPOXY NPEL 127E is an undiluted resin with a lower viscosity than NPEL-128E but providing similar properties after cure. Cured with polyamine or polyamide, it offers quality and high purity properties in applications, such as maximum mechanical strength, good chemical resistance and excellent heat resistance, etc. Because its low chloride content, NPEL-127E is more suitable for electronic application.

NPEK-114L is a C12-C14 aliphatic glycidyl ether diluted liquid resin, which has low viscosity to processing easily. It is excellent than conventionally diluted epoxy resins as better filler acceptance, reduced odor, lower vapor pressure and less potential for handing hazards. Cured NPEL-114L provides good levels of chemical resistance and physical properties, such as aliphatic polyamines and polyamides, usually their curing temperature are at room temperature.