Sơn & Sơn phủ

Air and forced drying industrial coatings with fast drying and high hardness. Specialty coatings for glass, precious metals and plastics. It is used as air drying coating systems Viacryl SC 200/40X is mainly used for fast drying industrial paints. The dried films are noted for very high hardness and excellent resistance poperties e.g. against water and diluted acids. For air-dried systems (tack-free in 15 minutes) Viacryl SC 200 can be used alone or in combination with plasticizers. Such systems compared with systems using Viacryl SC 200 as sole binder show better pigment wetting and flexibility. The use of plasticizers will, however have a negative influence on alkali resistance. The compatibility of Viacryl SC 200 with other coatings ingredients should be controlled from time to time. Stoving enamels For stoving systems Viacryl SC 200 is generally formulated with plasticizers and urea or melamine resins. The following ratios habe proven successful: Viacryl SC 200 : amino resin : plasticizer = 70 : 15 : 15 or 65 : 15 : 20 (on solids). Compared with air drying systems such systems show after curing (e. g. 30 min/140 °C) improved flexibility, hardness, impact and chip resistance. Specialty coatings For air drying as well as stoving systems Viacryl SC 200 can be used to formulate specialty coatings with good adhesion to glass, precious metals, and various plastics such as ABS and polyphenylene oxide (PPO).

SETALUX DA 160 X is primarily applied in combination with Desmodur® N, in the formulation of twocomponent polyurethane coatings with good lightfastness and resistance to chalking. SETALUX D A 160 X is used primarily in combination with Desmodur N 75 or N 3390 to formulate air- and force-drying top coats as well as anti-corrosion coatings and top coats for steel in civil and hydraulic engineering applications. The coatings can be applied by brushing, rolling and airless spraying. They have good weather stability and resistance to water, washing solutions and chemicals. They are stable up to approx. 150 °C. However, yellowing may occur at this temperature.

SETALUX 1915 BA-75 provides VOC compliant coatings (420 g/l) at low spray viscosity with super fast drying, high build and gloss, good mechanical properties, good chemical resistance and good outdoor durability. It is used as two-component clearcoats and solid colour topcoats for vehicle refinish. Two-component industrial topcoats.

MACRYNAL SM 513/60LG is an excellent mechanical properties and chemical resistance, high gloss. Fast drying two pack systems, in paricular for primer surfacers for car repairs and for general industrial applications. In combination with aliphatic polyisocyanates Macrynal SM 513/60LG is recommended for at ambient temperature drying or forced drying two pack systems. The principal application field is automotive refinishing and high-grade industrial paints. Due to its rapid initial drying Macrynal SM 513 is especially useful for the formulation of primer surfacers. Automotive refinishing clearcoats based on Macrynal SM 513 must be stabilized with light stabilizers.