Sơn & Sơn phủ

ADDITOL VXW 4973 is an easily emulsifiable defoamer with very good incorporating ability. It is suited for defoaming of coarse-disperse to fine-disperse (plastic) dispersions on the basis of PVAC, PVC, acrylates and their copolymerisates. Also low-viscous products may be defoamed with ADDITOL VXW 4973.

ADDITOL XL 6568 is used for the formulation of stripping enamels, release agents and temporary corrosion protection. ADDITOL XL 6568 is added to stripping enamels as anti adhesion promotor. Coatings of this nature give temporary protection against mechanical attack and corrosion to various substrates. Such coatings can easily be pealed off later. ADDITOL XL 6568 can be used in solvent based as well as in aqueous systems. Suitable binders for solvent based systems are the Hostaflex grades CM 150 and CM 133 as well as the Mowital grades B30HH and B60H. To formulate aqueous systems, acrylic dispersions like Ucecryl B 3022 are recommended. While solvent based release coatings can easily be removed from metallic substrates aqueous systems based on styrene acrylate dispersions can also be removed from glass, pottery, wood and plastics. For formulating systems with high film strength aqueous systems are more suitable than solvent based systems.

MODAFLOW 9200 is a new low‐viscosity flow modifier developed for high performance in solvent‐based automotive and industrial coatings, especially in clear top coat applications where it offers high gloss, low orange peel, and excellent DOI (Distinctivness of Image) in the coating film. Using of Modaflow 9200 can significantly improve the quality of the coatings as follows: improves flow and leveling, reduces pinholes, fisheyes, craters and orange peel, improves substrate wetting, improves or maintain high gloss, improves or maintain substrate and intercoat adhesion, facilitates pigment dispersion, quantity to be added: 0.1 ‐ 2.0 % on solid resin.

TEGO AIREX 931 is a defoamer and deaerator for solvent borne coatings, effective againts macrofoam.