เคมีภัณฑ์ชนิดพิเศษ

MACRYNAL SM 510N/60LG is a high gloss, very good mechanical properties, excellent outdoor stability and chemical resistance. In combination with polyisocyanates for at room temperature drying or forced drying two-pack systems for the industrial lacquer sector. In combination with aliphaticpolyisocyanates Macrynal SM 510 is recommended for at room temperature drying or forced drying two-pack systems. The principal application is the industrial lacquer sector. Coatings based on Macrynal SM 510 provide very good solvent and chemical resistance as well as excellent outdoor stability.

MACRYNAL SM 513/60LG is an excellent mechanical properties and chemical resistance, high gloss. Fast drying two pack systems, in paricular for primer surfacers for car repairs and for general industrial applications. In combination with aliphatic polyisocyanates Macrynal SM 513/60LG is recommended for at ambient temperature drying or forced drying two pack systems. The principal application field is automotive refinishing and high-grade industrial paints. Due to its rapid initial drying Macrynal SM 513 is especially useful for the formulation of primer surfacers. Automotive refinishing clearcoats based on Macrynal SM 513 must be stabilized with light stabilizers.

SETAL A F 48 TB/X is in the formulation of high-quality, air and force-drying industrial coatings, radiator paints, special effect finishes, primers and DIY paints. SETAL A F 48 TB/X is the standard binder for air and force-drying industrial coatings. Itsmain characteristics are its rapid drying (four-hour coating), good through-drying and curing to formdefect-free films, even in thick coats. It also yields good film properties - whiteness, resistance to yellowing, gloss and gloss retention, brilliance, body, flow and weather stability. SETAL A F 48 TB/X can be used in primers as well as in all types of top coats and one-coat finishes. Coatings based on SETAL A F 48 TB/X can be applied using conventional methods such as spraying, dipping and flow coating. A combination of 0.1 % Ca/0.06 % Co/0.2 % Zn and 0.2 % Zr-octoate, calculated as metal on solvent-free resin, has proved to be a useful mixture for speeding up the drying. Combination with long-oil alkyd resins is necessary for DIY paints applied by brushing.

SETAL A F 26 X is in the formulation of primers, knifing fillers, primer surfacers, top coats and dipping paints and flow coatings for radiators. Coatings based on SETAL A F 26 X are characterised by their very rapid drying and curing, high resistance to yellowing, weather stability and good anticorrosion properties. The use of alkaline pigments such as zinc phosphate, zinc oxide and aluminium triphosphate make it possible to optimize the anticorrosion properties of primers based on SETAL A F 26 X. Knifing fillers and primer surfacers applied in thickness of up to 200 μm can be dry-sanded within 1 hour. Combination with aminoplastic resins is recommended when formulating force-drying coatings.