เคมีภัณฑ์ชนิดพิเศษ

ADDITOL XL 6507 product, serving for trial purposes only. Deviations which might occur during transfer into manufacturing in a commercial scale are possible and do not constitute any material defect. ADDITOL XL 6507 is a solution of defoaming polymers without siliconeSuggested applications are - industrial coatings - 2 comp. acrylic/isocyanate systems - corrosion protection paints based on epoxy resins - wood and furniture coatings based on unsaturated polyesters and UV-curing systems In non-pigmented systems over dark surfaces, a slight turbidity, depending on the added amount, may occur.

ADDITOL XW 329 is a paint additive to enhance mar resistance and slip and levelling, particularly of water dilutable paints.ADDITOL XW 329 is a silicone resin supplied as low viscous solvent containing liquid. ADDITOL XW 329 enhances the slip of the film surface and thus protects it from scratching and abrasion. Furthermore, ADDITOL XW 329 improves levelling of the film and prevents film defects. Thus the surface quality ingeneral is improved. In many cases gloss is also enhanced. ADDITOL XW 329 can be employed in water dilutable paints of any type. Reduced intercoat adhesion has not been experienced with the use of ADDITOL XW 329. The effect of ADDITOL XW 329 varies with the formulation of the paint. A level of 0.1 - 0.3 % of ADDITOL XW 329 on the finished paint may serve as a guide.

ADDITOL XW 395 Enhances surface properties of the films and prevents film defects like insufficient wetting and structured surfaces owing to impurities. ADDITOL XW 395 is an additive specially designed for Resydrol paint systems and, compatibility provided, for other waterborne paint systems. Considering the levels and restrictions given below ADDITOL XW 395 can be used in any water dilutable paint with the exception of electrodeposition paints. ADDITOL XW 395 prevents film defects, such as craters and pin holes or can remedy poor wetting owing to impurities brought into the aqueous paint during preperation or processing. Insufficiently degreased metal is the main cause for such troubles. With ADDITOL XW 395 wetting problems are avoided. It should be noted that film defects arising from silicone oils in many cases cannot be prevented with ADDITOL XW 395. ADDITOL XW 395 prevents floating of pigments, striation, orange peel, etc. and improves the film surface in general. ADDITOL XW 395 at the recommended levels, does not impair the physical properties of the stoved film. In primers ADDITOL XW 395 may cause a certain degree of gloss. Additions of ADDITOL XW 395 may adversely influence the effect of antifoaming agents; on the other hand, it can remedy infavourable effects of the antifoams. In aqueous paints for spray application ADDITOL XW 395 can be used without precautions, while in dipping or flow coating paints ADDITOL XW 395 must be carefully balanced with the antifoams normally present.

MODAFLOW RESIN is a flow modifier for non-aqueous industrial coatings and powder coatings. Using of Modaflow Resin in non-aqueous industrial coatings can significantly improve the properties of unmodified resins as follows: Improve flow and leveling, Reduce pinholes, fisheyes, craters and orange peel, Improve substrate wetting, Maintain or improve substrate adhesion, Defoam and aid in air release and Facilitate pigment dispersion. Modaflow resin is also effective in eliminating pinholes and craters in epoxy, polyester, hybrid, urethane, and acrylic powder coatings. Modaflow resin does not contain silicone ingredients. Modaflow Resin is regulated by the U.S. Food and Drug Administration (FDA) for indirect food contact applications under several parts of Title 21, Code of Federal Regulations. Details on specific coverage are available upon request. Quantity to be added: 0,1 - 2,0 % on solid resin