text.skipToContent text.skipToNavigation
เคมีภัณฑ์ชนิดพิเศษ

เคมีภัณฑ์ชนิดพิเศษ

Innovative specialty chemicals for industrial applications

เคมีภัณฑ์ชนิดพิเศษ

พบสินค้า 230 ชิ้น

กรอง
ตัวกรองที่ใช้ล้างทั้งหมด

Sustainable
คําขอตัวอย่าง
รายละเอียดการติดต่อของผู้ร้องขอ
ชื่อเต็ม
บริษัท
ฐานะ
หมายเลขโทรศัพท์
ที่อยู่อีเมลที่ทํางาน
ที่อยู่จัดส่ง

Thank you. Your request has been sent.

ADDITOL VXW 4926

ADDITOL VXW 4926 is a rapid defoaming or air release.It allows high film thickness of stoving paints, without cissing. Also suited for combinations of dispersions with water dilutable synthetic resins.ADDITOL VXW 4926 is a surface active additive for water dilutable paints. Particularly with spray application cissing on curing of the paint is prevented or may appear only with higher film thickness. Since ADDITOL VXW 4926 is not dilutable with water, it should be incorporated with great care. The dosed range is between 2 % and 15 % for 100 % binder solids. The optimum quantity should be determined in individual tests.
ADDITOL VXW 6208

ADDITOL VXW 6208 is a dispersing and wetting additive for inorganic and organic pigments and extenders. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high-filled paint systems. It isn't compatible with binders which are dissolved in aliphatic hydrocarbons. ADDITOL VXW 6208 is used for the production of binder-free pigment pastes and for tinting base colours. ADDITOL VXW 6208/60 is mainly applied as wetting agent in solvent-free and solvent-borne two pack-epoxy-systems.
SETAL A F 26 X

SETAL A F 26 X is in the formulation of primers, knifing fillers, primer surfacers, top coats and dipping paints and flow coatings for radiators. Coatings based on SETAL A F 26 X are characterised by their very rapid drying and curing, high resistance to yellowing, weather stability and good anticorrosion properties. The use of alkaline pigments such as zinc phosphate, zinc oxide and aluminium triphosphate make it possible to optimize the anticorrosion properties of primers based on SETAL A F 26 X. Knifing fillers and primer surfacers applied in thickness of up to 200 μm can be dry-sanded within 1 hour. Combination with aminoplastic resins is recommended when formulating force-drying coatings.
ROSKYDAL XP 2072

ROSKYDAL XP 2072 is especially suitable for conventional- or UV-curing (transparent or pigmented) topcoats and pigmented sealers for wood and furniture. properties for applications by spraying or curtain in UV- or conventionalcuringsystems. ROSKYDAL XP 2072 is usually used as the sole binder. If made necessary by the application (high amount) and compatibility exists, it can be flexibilized with other ROSKYDAL grades, e.g. ROSKYDAL 550 or E 70.
ขอโทษ! คุณไม่สามารถเว้นฟิลด์นี้ว่างไว้ได้
ขอโทษ! คุณไม่สามารถเว้นฟิลด์นี้ว่างไว้ได้
ขอโทษ! คุณไม่สามารถเว้นฟิลด์นี้ว่างไว้ได้
ขอโทษ! คุณไม่สามารถเว้นฟิลด์นี้ว่างไว้ได้
ขอโทษ! คุณไม่สามารถเว้นฟิลด์นี้ว่างไว้ได้
ขอโทษ! คุณไม่สามารถเว้นฟิลด์นี้ว่างไว้ได้
ขอโทษ! คุณไม่สามารถเว้นฟิลด์นี้ว่างไว้ได้
ขอโทษ! คุณไม่สามารถเว้นฟิลด์นี้ว่างไว้ได้
ขอโทษ! คุณไม่สามารถเว้นฟิลด์นี้ว่างไว้ได้
ขอโทษ! คุณไม่สามารถเว้นฟิลด์นี้ว่างไว้ได้
ขอโทษ! คุณไม่สามารถเว้นฟิลด์นี้ว่างไว้ได้
*ต้องระบุ

ขอบคุณสําหรับคําถามของคุณ

เราจะติดต่อคุณภายในสองสามวันทําการ

ปริมาณสินค้าได้รับการปรับปรุง