เคมีภัณฑ์ชนิดพิเศษ

SETAL 1201 SM-50 is Good hardness, fast drying and abrasion resistant. It is used as decorative varnishes.

VALITHANE RU 050.22 is a PU alkyd.

VIALKYD AC 290/70MPAC has an excellent compatibility characteristics with alkyd stoving paints, thermosetting acrylic paints, NC-lacquers, acid curing enamels, alkyd- or acrylic-isocyanate enamels. Grinding resin for pigment pastes. VIALKYD AC 290 has been designed as grinding resin in the formulation of pigment pastes which have full compatibility with alkyd stoving paints, thermosetting acrylic paints, nitrocellulose enamels and acid curing enamels, alkyd- or acrylics- polyiscoyanate combinations. The pastes can be reduced with the respertive resins and give paints with the performance of irrelevant modified basic paint properties. VIALKYD AC 290 has a balanced functionality and is fully integrated into the cured film. Therefore, it must be fully considered as resin component for reaction with amine resins, polyisocyanates, nitrocellulose systems and acid curing systems. Up to a resin proportion of 30 % of VIALKYD AC 290, the performance of the binder resin is not influenced adversely. VIALKYD AC 290 shows yellowing resistance up to 30 min / 200 °C and acts up favourably to top quality alkyd resins. Solvent resistance is not adversely affected. At low curing temperatures, VIALKYD AC 290 shows good crosslinking and is thus also suitable for quick stoving 80 °C enamels. Owing to the excellent performance of VIALKYD AC 290 in a variety of paint formulations and due to the fact that VIALKYD AC 290 does not subdue the characteristics of the main binder, paint preparation can be substantially rationalized with this new grinding medium.

VIALKYD AS 6140sca/49SD60, directly after production, is supplied as a liquid pumpable urethane thixotropic alkyd, which can be used as sole binder or in combination with other alkyds for decorative paints and wood stains. After a while without stirring some thixotropy occurs which affects or inhibits pumpability (see Storage). Concerning gloss retention and weather resistance VIALKYD AS 6140sca/49SD60 shows better properties than polyamide thixotropic alkyds. The thixotropy of urethane thixotropic alkyds can be easier destroyed by stirring than that of polyamide thixotropic resins. Thixotropy can be activated and adjusted by adding a polar solvent, for example propylene glycol. In order to avoid cloudiness we recommend not to add more than four percent propylene glycol (calculated on resin solids). The activated and adjusted thixotropy will stay largely constant after ripening for one week longest. Recommended driers are cobalt (0.05 % metal, calculated on resin solids), zircon (0.15 % metal, calculated on resin solids), and calcium (0.1 % metal, calculated on resin solids). To avoid skinning we recommend the addition of about 1.5 % ADDITOL XL 297 (calculated on resin solids).