Air and forced drying industrial coatings with fast drying and high hardness. Specialty coatings for glass, precious metals and plastics. It is used as air drying coating systems Viacryl SC 200/40X is mainly used for fast drying industrial paints. The dried films are noted for very high hardness and excellent resistance poperties e.g. against water and diluted acids. For air-dried systems (tack-free in 15 minutes) Viacryl SC 200 can be used alone or in combination with plasticizers. Such systems compared with systems using Viacryl SC 200 as sole binder show better pigment wetting and flexibility. The use of plasticizers will, however have a negative influence on alkali resistance. The compatibility of Viacryl SC 200 with other coatings ingredients should be controlled from time to time. Stoving enamels For stoving systems Viacryl SC 200 is generally formulated with plasticizers and urea or melamine resins. The following ratios habe proven successful: Viacryl SC 200 : amino resin : plasticizer = 70 : 15 : 15 or 65 : 15 : 20 (on solids). Compared with air drying systems such systems show after curing (e. g. 30 min/140 °C) improved flexibility, hardness, impact and chip resistance. Specialty coatings For air drying as well as stoving systems Viacryl SC 200 can be used to formulate specialty coatings with good adhesion to glass, precious metals, and various plastics such as ABS and polyphenylene oxide (PPO).

MACRYNAL VSM 2702/58XSNA is used in combination with aliphatic polyisocyanates, e.g. Demodur N 75 or Desmodur N 3390 for high quality two-component industrial coatings. To be emphasized is the excellent adhesion, even to non iron metals.

MACRYNAL SM 540/60X is a high gloss, excellent mechanical properties and superior adhesion to metals and non-iron metals (aluminium, zinc). In combination with polyisocyanates for air-drying as well as forced drying primers and topcoats for industrial applications. In combination with polyisocyanates Macrynal SM 540 is suggested for highly elastic air-drying and forced drying two-pack systems. The principal application area is industrial coatings, in particular - due to the good adhesion to metals - primers.

MACRYNAL VSM 2155/60EPAC, in combination with aliphatic polyisocyanates, pre-eminently with Desmodur N 75 (Covestro), produces two-pack clearcoats and pigmented topcoats with excellent chemical resistance for the industrial acquer sector. Macrynal VSM 2155 is especially suited for coatings on aeroplanes or military vehicles.