PLEXTOL R 826 binder for interior varnishes and stains. PLEXTOL R 826 is an acrylic copolymer dispersion.

SETAQUA 6785 is a waterbased self-crosslinking resin with fine particle size and especially designed for high performance topcoats such as coatings for furniture and kitchen cabinets. Coatings based on SETAQUA 6785 can fulfill the higher level specifications of furniture qualifications like mobelfacta. Waterborne coatings formulated with SETAQUA 6785 feature exceptional water and chemical resistance as well as dry and wet heat resistance. Objects coated with finishes based on SETAQUA 6785 can be stacked and transported according to the highest qualifications. SETAQUA 6785 has excellent response to thickeners and matting agents because of its colloidal and particle design. This enables the formulation of cost effective coatings. In very demanding applications, SETAQUA 6785 can be formulated into 2K Isocyanate curing coatings generally applied on table tops and wear resistant parquet laquers. For optimum results, it is recommended to use primers based on SETAQUA 6756. It is used as Industrial wood topcoats for the furniture and kitchen cabinet markets.

SETAQUA B E 270 is applied in combination with water-thinnable amino resins in the formulation of industrial stoving coatings and aqueous stoving primer surfacers for online automotive finishing, both with a low co-solvent content. Combined with water-thinnable amino resins. SETAQUA B E 270 is particularly suitable for the formulation of aqueous stoving primer surfacers with low cosolvent content for use in online automotive finishing. To ensure good intercoat adhesion to conventional automotive topcoats, a SETAQUA- /amino resin ratio of 90:10 to 85:15 (calculated on the solvent-free resin) is recommended. The paint films yielded have good hardness, flexibility and adhesion. If above-average stonechip resistance is required, SETAQUA B E 270 should be combined with polyurethane dispersions. SETAQUA B E 270 can also be used in general industrial finishing. Depending on the reactivity of the melamine resin used, a ratio of 85:15 to 70:30 can be used to formulate highly flexible primers and hard, well crosslinked, high gloss top coats. SETAQUA B E 270 has proved particularly suitable for the formulation of dip primers which are subsequently overcoated with powder coatings. The stoving conditions for SETAQUA B E 270 depend on the type of amino resin used. The stoving range is between 30 min. at 120 °C and 60 min at 180 °C in the overbaking process. Because of the good shear stability of SETAQUA B E 270, the pigments can be added directly to the binder. Suitable grinding equipment includes the bead mill, dyno mill and red devil. However, the use of suitable wetting agents and antifoams is essential. Optimum pigment wetting is achieved if the entire amount of dimethyl ethanol amine required to adjust the coating to a pH of 8.5 - 8.8 is added to the mill base. Details are given in the guide formulations for SETAQUA B E 270.

SETAQUA 6801 is a pseudoplastic after neutralization, good aluminium orientation, good atomisation, insoluble in organic solvents, excellent stability. It is used as metallic and solid colour waterborne basecoats for the automotive OEM industry and car refinishing.