SETAL 82166 SS-64 is a combination with aliphatic poly-isocyanates: good anti-sag property with good levelling and clarity after drying at increased or ambient temperature. Good outdoor durability, excellent mechanical properties. It is flexible clearcoats applied over basecoats. Clearcoat has good anti-sag property directly after spraying of high film thickness. Easy handling at paint preparation and good storage stability.

SETAL 82166 SS-55 is a combination with aliphatic poly-isocyanates: good anti-sag property with good levelling and clarity after drying at increased or ambient temperature. Good outdoor durability, excellent mechanical properties. It is used as flexible clearcoats applied over basecoats. Clearcoat has good anti-sag property directly after spraying of high film thickness. Easy handling at paint preparation and good storage stability.

ROSKYDAL E 70 is a flexibilising resin for wax-free polyesters, UV-curing styrene systems and spray, roller and knifing fillers. Even in a ratio of 6 : 4, clear or pigmented combinations of ROSKYDAL 500 A and ROSKYDAL E 70 have excellent scratch resistance and gloss. This mixing ratio yields highly flexible coatings and improves the polishability of films based on ROSKYDAL 500 A. ROSKYDAL E 70 is also suitable for use as a flexibilizer in photo-polymerizing ROSKYDAL systems and in clear coats, roller primers and highly filled roller fillers based on ROSKYDAL 300/1. ROSKYDAL E 70 is a highly effective flexibilizer. The systems to which it is added are easier to sand because they abrade more readily. Adding larger amounts of ROSKYDAL E 70 to spray fillers based on wax-free polyesters such as ROSKYDAL 500 A or 620 yields excellent adhesion on medium-density fiberboard, metal car body components and some plastics. ROSKYDAL E 70 can also be used to flexibilize amine-accelerated grades such as ROSKYDAL K 14 M, K 36 and K 40 T.

ROSKYDAL K 12 P is a binder for highly filled knifing fillers and stoppers for marble and stone. Fillers based on ROSKYDAL K 12 P cure fully whether applied in thin or thick coats. They are used in applications requiring hard adhesives and fillers. Formulation Combinations of talc, dolomite/calcite and powdered barytes with low iron content have proved suitable as extenders, with talc as the main component because it improves the adhesion to the substrate. The more spherical extenders such as dolomite, chalk and barytes ensure dense packing.