SETAL 82166 SS-55 is a combination with aliphatic poly-isocyanates: good anti-sag property with good levelling and clarity after drying at increased or ambient temperature. Good outdoor durability, excellent mechanical properties. It is used as flexible clearcoats applied over basecoats. Clearcoat has good anti-sag property directly after spraying of high film thickness. Easy handling at paint preparation and good storage stability.

SETAL 1603 BA-78 provides VOC compliant coatings (400 g/l) with high build and gloss, very good outdoor durability, good mechanical properties and good chemical resistance (in combination with aliphatic poly-isocyanates). It is used as two component clearcoats and solid colour topcoats for vehicle refinish. Co-binder for combination with acrylic resins for two component systems with reduced VOC.

ROSKYDAL E 70 is a flexibilising resin for wax-free polyesters, UV-curing styrene systems and spray, roller and knifing fillers. Even in a ratio of 6 : 4, clear or pigmented combinations of ROSKYDAL 500 A and ROSKYDAL E 70 have excellent scratch resistance and gloss. This mixing ratio yields highly flexible coatings and improves the polishability of films based on ROSKYDAL 500 A. ROSKYDAL E 70 is also suitable for use as a flexibilizer in photo-polymerizing ROSKYDAL systems and in clear coats, roller primers and highly filled roller fillers based on ROSKYDAL 300/1. ROSKYDAL E 70 is a highly effective flexibilizer. The systems to which it is added are easier to sand because they abrade more readily. Adding larger amounts of ROSKYDAL E 70 to spray fillers based on wax-free polyesters such as ROSKYDAL 500 A or 620 yields excellent adhesion on medium-density fiberboard, metal car body components and some plastics. ROSKYDAL E 70 can also be used to flexibilize amine-accelerated grades such as ROSKYDAL K 14 M, K 36 and K 40 T.

ROSKYDAL K 14 M is a binder for highly filled knifing fillers, putties for marble and stone and adhesives. Because of the high reactivity of ROSKYDAL K 14 M, fillers based on this product cure fully in a very short time, even when applied in thick coats. They are used in applications requiring hard adhesives and fillers. A particular advantage of ROSKYDAL K 14 M is the pale colour of the polymer formed. This makes it ideal for use in the formulation of stoppers for marble and stone, especially on pale marble and if early sanding and polishing is required. ROSKYDAL K 14 M can be combined with other ROSKYDAL K grades (K 30, K 36, K 45, K 60) to increase their hardness. improves the adhesion to the substrate. The more spherical extenders such as dolomite, chalk and barytes ensure dense packing.