Air and forced drying industrial coatings with fast drying and high hardness. Specialty coatings for glass, precious metals and plastics. It is used as air drying coating systems Viacryl SC 200/40X is mainly used for fast drying industrial paints. The dried films are noted for very high hardness and excellent resistance poperties e.g. against water and diluted acids. For air-dried systems (tack-free in 15 minutes) Viacryl SC 200 can be used alone or in combination with plasticizers. Such systems compared with systems using Viacryl SC 200 as sole binder show better pigment wetting and flexibility. The use of plasticizers will, however have a negative influence on alkali resistance. The compatibility of Viacryl SC 200 with other coatings ingredients should be controlled from time to time. Stoving enamels For stoving systems Viacryl SC 200 is generally formulated with plasticizers and urea or melamine resins. The following ratios habe proven successful: Viacryl SC 200 : amino resin : plasticizer = 70 : 15 : 15 or 65 : 15 : 20 (on solids). Compared with air drying systems such systems show after curing (e. g. 30 min/140 °C) improved flexibility, hardness, impact and chip resistance. Specialty coatings For air drying as well as stoving systems Viacryl SC 200 can be used to formulate specialty coatings with good adhesion to glass, precious metals, and various plastics such as ABS and polyphenylene oxide (PPO).

SETALUX 1905 BA-74 is a fast drying VOC compliant coatings (420 g/l) with high build and gloss, excellent mechanical properties and good outdoor durability (in combination with aliphatic poly-isocyanates). It is used as industrial topcoats. Clearcoats and solid colours for vehicle refinish.

SETALUX 1215 BA-68 is in combination with aliphatic isocyanates: suitable for the manufacture of air-drying and forced drying two component lacquer systems with good exterior durability, good build and gloss, high end hardness and excellent chemical resistance. It is used as clearcoats and solid colour lacquer systems for vehicle refinishing and commercial vehicles. Industrial top-coats.

SETALUX 1753 SS-70 is a technical features In combination with aliphatic poly-isocyanates: fast drying, high build and gloss, excellent mechanical properties and chemical resistance, practically no yellowing under UV-light, high solids content at application viscosity. It is used as varnishes, clearcoats and solid colour systems for car repair (cars, trains and tram units etc.). Industrial topcoats (big rolling stock).