SETATHANE D E 2767 is applied in combination with aromatic polyisocyanates based on diphenylmethane diisocyanate as binder for solvent-free two-component polyurethane coatings with high chemical resistance for concrete and other porous substrates, fillers, sealing compounds and synthetic resin mortars. SETATHANE D E 2767 is suitable for the formulation of coatings, mortars and sealers with high chemical resistance. Coatings formulated with SETATHANE D E 2767 generally exhibit outstanding resistance to organic and inorganic acids, alkalis and solvents. Over-cross linking of 50 % and more is usual. This allows a wide-ranging variation in flow and chemical resistance. To ensure blister-free curing, SETATHANE D E 2767 requires the addition of hydrated lime in accordance with DIN EN 12 518 (or cement if necessary) as a CO2 scavenger. In certain cases where the film thickness is less than 100 μm, there is no need to add hydrated lime.

DAOTAN VTW 6462/36WA is a solvent-free self-crosslinking acrylated polyurethane dispersion with very good wetting properties, curing rapidly to give clear crack-free films. Daotan VTW 6462 is stable to applied shear forces and has good pigment compatibility. Cured films show good abrasion resistance and have good resistance to household detergents. This polyurethane emulsion was designed to formulate coating systems for various plastics such as ABS, PA, rigid PVC, flexible PVC and PMMA. Aqueous primers and base coats can be formulated. The adhesion to any plastic substrate to be coated should first be carefully examined.

DAOTAN VTW 6463/36WA is a solvent-free acrylated polyurethane dispersion with very good wetting properties, quick curing to give clear crack-free films. Daotan VTW 6463 is stable to applied shear forces and has good pigment compatibility. Cured films show good abrasion resistance and have good resistance to household detergents. This polyurethane emulsion was designed to formulate coating systems for various plastics such as ABS, PA, rigid PVC, flexible PVC and PMMA. Aqueous primers and base coats can be formulated. The adhesion to any plastic substrate to be coated should be carefully examined firstly.

SETAQUA 6515 is an acrylic polyol emulsion suitable for high durable, abrasion- and chemical resistant two-component waterborne PUR paint systems. It is used as paint-systems where low co-solvents levels and a high layer thickness without foaming are required. High gloss clearcoats and topcoats for drying at room temperature as well as drying at elevated temperatures. Blending partner for our other waterborne 2-pack resins. Application areas: Commercial Transport and ACE & Machinery.