SETAL 1201 SM-50 is Good hardness, fast drying and abrasion resistant. It is used as decorative varnishes.

SETAL 142 XX-60 is very fast drying, good elasticity and yellowing resistance (also at elevated temperature), good adhesion on steel. It is used as fast drying industrial topcoats. Fast drying corrosion resistant primers. General purpose stoving enamels.

VIALKYD AS 6140sca/49SD60, directly after production, is supplied as a liquid pumpable urethane thixotropic alkyd, which can be used as sole binder or in combination with other alkyds for decorative paints and wood stains. After a while without stirring some thixotropy occurs which affects or inhibits pumpability (see Storage). Concerning gloss retention and weather resistance VIALKYD AS 6140sca/49SD60 shows better properties than polyamide thixotropic alkyds. The thixotropy of urethane thixotropic alkyds can be easier destroyed by stirring than that of polyamide thixotropic resins. Thixotropy can be activated and adjusted by adding a polar solvent, for example propylene glycol. In order to avoid cloudiness we recommend not to add more than four percent propylene glycol (calculated on resin solids). The activated and adjusted thixotropy will stay largely constant after ripening for one week longest. Recommended driers are cobalt (0.05 % metal, calculated on resin solids), zircon (0.15 % metal, calculated on resin solids), and calcium (0.1 % metal, calculated on resin solids). To avoid skinning we recommend the addition of about 1.5 % ADDITOL XL 297 (calculated on resin solids).

SETAL 1606 BA-80 provides VOC compliant coatings (below 400 g/l) with high build and gloss, very good outdoor durability, good mechanical properties and good chemical resistance. It is used as two-component clearcoats and solid colour topcoats for vehicle refinish. Co-binder for combination with acrylic resins for two-component systems with reduced VOC.