ADDITOL VXL 6237 N improves the wetting of very difficult-to-disperse pigments, specially in aromatic free solventborne highgrade automotive series, car repair and industrial paints. Shortens the dispersing time. Prevents the reflocculation of the pigments. Improves gloss and levelling. ADDITOL VXL 6237 N permits a higher pigmentation of the mill base without increasing viscosity and shortens the dispersing time. The ready pigment pastes and paints are distinguished by a high colloidal stability and do not tend to a reflocculation of the pigments. By using ADDITOL VXL 6237 N in solvents containing acrylate systems, a stabilizing effect on the binder can be observed.

ADDITOL VXW 6208 is a dispersing and wetting additive for inorganic and organic pigments and extenders. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high-filled paint systems. It isn't compatible with binders which are dissolved in aliphatic hydrocarbons. ADDITOL VXW 6208 is used for the production of binder-free pigment pastes and for tinting base colours. ADDITOL VXW 6208/60 is mainly applied as wetting agent in solvent-free and solvent-borne two pack-epoxy-systems.

ADDITOL XL 203 is a high pigment loading without increase in viscosity. Reduction of dispersing time. For air drying and stoving solvent-borne paints and for water dilutable paint systems. ADDITOL XL 204 prevents the floating of titanium dioxide in conjunction with organic or inorganic coloured pigments. It can be employed in solvent-borne and water dilutable air drying and stoving paint systems. ADDITOL XL 204 affords higher pigment loading of the paint system and pigment pastes without causing the viscosity rise usual with such products and, at the same time, reduces dispersing time. The recommended level may range from 0.1 to 1.5 % on total paint. Level on pigments: inorganic pigments: 0.5 - 2.5 % organic pigments: 1.5 - 5.0 %, Levels of addition in water dilutable air drying and stoving system may range from 1 to 6 % on pigments. The figures given here may serve as a guide for extensive trials to find the optimum in dosage and effect to save costs.

ADDITOL XW 6535 is a grinding medium, especially designed for low VOC decorative systems. The special composition allows high pigment loading and very good compatibility to common decorative water borne and solvent borne binder systems. For the production of universal pigment concentrates based on ADDITOL XW 6535 we recommend to use the following ADDITOL grades: ADDITOL VXW 6205 (dispersing agent for inorganic pigments) ADDITOL VXW 6387 (anti settling ADDITOL VXW 6372 (preserver) and ADDITOL VXW 6211 (defoamer).