text.skipToContent text.skipToNavigation

All

Encontramos 358 itens.

Filtro
Filtros aplicadosApagar tudo

Certification
Sustainable
Solicitação de amostra
Dados de contato do solicitante
Nome completo
Companhia
Posição
Número telefônico
Endereço de e-mail de trabalho
Endereço de entrega

Thank you. Your request has been sent.

ADDITOL XL 102

ADDITOL XL 102 is used to improve the effectiveness of paint removers containing paraffine and wax. Post treatment with organic solvents is not necessary.
ADDITOL VXW 6208

ADDITOL VXW 6208 is a dispersing and wetting additive for inorganic and organic pigments and extenders. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high-filled paint systems. It isn't compatible with binders which are dissolved in aliphatic hydrocarbons. ADDITOL VXW 6208 is used for the production of binder-free pigment pastes and for tinting base colours. ADDITOL VXW 6208/60 is mainly applied as wetting agent in solvent-free and solvent-borne two pack-epoxy-systems.
ADDITOL VXW 6386

ADDITOL VXW 6386 Easy emulsifable defoamer, espacially for high quality waterborne sytems, at there conventionally mineral-oil or silicon based defoamers cause decrease the surface quallity of the film (orange peel, craters). At forced and stoving drying paints it can observed a higher cissing free filmthickness. ADDITOL VXW 6386 is qualified for following waterborne systems: stoving enamel based on alkyd- or acrylic-melamine resin, 2 component acrylic-isocyanate paints, paints based on waterdilutable alkyd resin and gloss and semigloss dispersion paint.
ADDITOL VXL 4950

ADDITOL VXL 4950 is a product without special pre-treatment of plastic materials such as polyethylene, polypropylene and polyamide (e.g. corona discharge, roughening, flame or chromic acid treatment) good adhesion of coatings can be obtained after applying a thin adhesion promoting layer of ADDITOL VXL 4950 to the surfaces. For plastic substrates made of polyethylene a short period of additional UV-irradiation of this film is recommendable. In general irradiation of ADDITOL VXL 4950-coatings can further improve adhesion .
A quantidade do produto foi atualizada.