Especialidades Químicas

BECKOPOX EP 147W is a non-crystallizing, contains co-reacting emulsifiers. Primers/coatings on mineral and metallic substrates. Adhesives and water-washable jointing-compounds for tiles. BECKOPOX EP 147W is a non-crystallizing Bisphenol A/F liquid epoxy resin containing cross-linkable emulsifiers. Formulations cured with Beckopox EH 613w, EH 623w or EH 659w give hard films with high abrasion resistance, good corrosion protection and chemical resistance. To adjust viscosity a reduction with reactive diluents such as Beckopox EP 075 and EP 080 is possible. Beckopox EP 147w can be formulated together with the solid resin dispersions Beckopox EP 384w or EP 385w to improve their hardness adhesion to porous substrates.

BECKOPOX EP 387W/52WA is an internally plasticized solid resin-Type 1-dispersion with improved shear stability, e. g. for water reducible fast drying anticorrosion primers and coatings for plastics.BECKOPOX EP 387W/52WA is an internally plasticized type 1solid epoxy resin as aqueous dispersion. Formulated together with adequate curing agents such as e. g. Beckopox VEH 2188w/55WA it is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optimium corrosion protection it is recommended using 75 % of the stoichiometric curing agent quantity. Dispersion of pigments and fillers can be done in Beckopox EP 387w/52WA if the temperature does not exceed 40 °C. The formulated paint stability can be influenced by the additives used so that it is important to investigate their suitability thoroughly; such additves should not contain functional groups capable of reacting with epoxy groups.

Beckopox EP 2384w is a type 1 solid epoxy resin as aqueous dispersion. Formulated together with suitable curing agents such as Beckopox EH 623w, EH 659w, VEH 2188w or VEH 2177w it results in rapid drying coating systems for mineral and metal substrates. The rapid drying property makes it possible to apply more coats within one working day. Dispersing of pigments and fillers can be carried out in Beckopox EP 2384w if the temperature does not exceed 40 °C. The formulated paint stability can be influenced by additives; the additives should not contain functional groups capable of reacting with epoxy groups.

BECKOPOX EP 384W/53WAMP is a solid resin-Type 1-dispersion, even in combination with water-emulsifiable liquid resins for fast drying coatings, preferably for mineral substrates. BECKOPOX EP 384W/53WAMP is a type 1 solid epoxy resin as aqueous dispersion. Formulated together with suitable curing agents such as Beckopox EH 623w, EH 659w or VEH 2177w it results in rapid drying coating systems for mineral substrates. The rapid drying property makes it possible to apply more coats within one working day. Dispersing of pigments and fillers can be carried out often in Beckopox EP 384w/53WAMP if the temperature does not exceed 40°C. The formulated paint stability can be influenced by additives; the additives should not contain functional groups capable of reacting with epoxy groups.