ROSKYDAL K 65 is a binder for highly filled, coarse and fine knifing fillers for use on metal, wood and mineral substrates. Fillers based on ROSKYDAL K 65 cure fully when applied in both thin and thick coats. They can be made harder by the addition of, for example, ROSKYDAL K 14 M or ROSKYDAL K 36. Formulation Combinations of talc, dolomite/calcite and baryteswith lowiron content have proved suitable as extenders, with talc as the main component because it improves the adhesion to the substrate.

ROSKYDAL XP 2072 is especially suitable for conventional- or UV-curing (transparent or pigmented) topcoats and pigmented sealers for wood and furniture. properties for applications by spraying or curtain in UV- or conventionalcuringsystems. ROSKYDAL XP 2072 is usually used as the sole binder. If made necessary by the application (high amount) and compatibility exists, it can be flexibilized with other ROSKYDAL grades, e.g. ROSKYDAL 550 or E 70.

SETATHANE D E 2767 is applied in combination with aromatic polyisocyanates based on diphenylmethane diisocyanate as binder for solvent-free two-component polyurethane coatings with high chemical resistance for concrete and other porous substrates, fillers, sealing compounds and synthetic resin mortars. SETATHANE D E 2767 is suitable for the formulation of coatings, mortars and sealers with high chemical resistance. Coatings formulated with SETATHANE D E 2767 generally exhibit outstanding resistance to organic and inorganic acids, alkalis and solvents. Over-cross linking of 50 % and more is usual. This allows a wide-ranging variation in flow and chemical resistance. To ensure blister-free curing, SETATHANE D E 2767 requires the addition of hydrated lime in accordance with DIN EN 12 518 (or cement if necessary) as a CO2 scavenger. In certain cases where the film thickness is less than 100 μm, there is no need to add hydrated lime.

ROSKYDAL K 27 LV is a binder for highly filled knifing fillers and stoppers for marble and stone. Fillers based on ROSKYDAL K 27 LV cure fully whether applied in thin or thick coats. They are used in applications requiring hard adhesives and fillers. Formulation Combinations of talc, dolomite/calcite and powdered barytes with low iron content have proved suitable as extenders, with talc as the main component because it improves the adhesion to the substrate. The more spherical extenders such as dolomite, chalk and barytes ensure dense packing.