ROSKYDAL K-36 is a binder for highly filled, coarse and fine knifing fillers for use on metal, wood and mineral substrates. Due to the high reactivity of ROSKYDAL K 36, fillers based on this product quickly cure to sandability, especially with sandingmachines. The hardness of ROSKYDAL K 36 is equivalent to that of a 1 : 1 combination of the hard ROSKYDAL K 14 M and the flexible ROSKYDAL K 60. ROSKYDAL K 36 is ideal for use as the sole binder for car body fillers. It can be made harder by the addition of ROSKYDAL K 14 M and more flexible by combination with ROSKYDAL K 60. The low viscosity of the resin promotes the wetting of the extenders, thus reducing the formulation time of fillers.

SETAL D RD-181-MPA is the co-reactant for Desmodur HL, IL, L and N in the formulation of twocomponent PU coatings. SETAL D RD 181 MPA is used in the formulation of coatings for wood, e.g. boats and parquet flooring.

ROSKYDAL E 70 is a flexibilising resin for wax-free polyesters, UV-curing styrene systems and spray, roller and knifing fillers. Even in a ratio of 6 : 4, clear or pigmented combinations of ROSKYDAL 500 A and ROSKYDAL E 70 have excellent scratch resistance and gloss. This mixing ratio yields highly flexible coatings and improves the polishability of films based on ROSKYDAL 500 A. ROSKYDAL E 70 is also suitable for use as a flexibilizer in photo-polymerizing ROSKYDAL systems and in clear coats, roller primers and highly filled roller fillers based on ROSKYDAL 300/1. ROSKYDAL E 70 is a highly effective flexibilizer. The systems to which it is added are easier to sand because they abrade more readily. Adding larger amounts of ROSKYDAL E 70 to spray fillers based on wax-free polyesters such as ROSKYDAL 500 A or 620 yields excellent adhesion on medium-density fiberboard, metal car body components and some plastics. ROSKYDAL E 70 can also be used to flexibilize amine-accelerated grades such as ROSKYDAL K 14 M, K 36 and K 40 T.

SETATHANE D 1145 is applied in the formulation of hard and tough coatings and synthetic resin mortars.It is used in combination with other polyols such as SETATHANE D 1150 and crosslinked with Desmodur VL, SETATHANE D 1145 is suitable for use in the formulation of two-component coatings. The main applications are in the construction industry. Curing yields hard to tough but flexible films which are resistant to abrasion and chemicals. In combination with other polyols such as SETATHANE D 1150 and crosslinked with Desmodur VL, SETATHANE D 1145 is suitable for use in the formulation of two-component coatings. The main applications are in the construction industry. Curing yields hard to tough but flexible films which are resistant to abrasion and chemicals.