ADDITOL XL 102 is used to improve the effectiveness of paint removers containing paraffine and wax. Post treatment with organic solvents is not necessary.

ADDITOL VXL 4930 may be used in all solvent-containing and water-dilutable paint systems. It promotes the spray dust absorption, prevents orange peel and increases scratch resistance. ADDITOL VXL 4930 is effective at low concentrations and at the correct dosage, does not adversely affect intercoat adhesion. Blistering, cratering and floating in pigment blends are effectively prevented. It does not stabilize the foam during paint production and application. The substrate wetting is advanced.ADDITOL VXL 4930 is used primarily in industrial stoving/baking paints and 2K PUR paint systems.

ADDITOL VXW 6386 Easy emulsifable defoamer, espacially for high quality waterborne sytems, at there conventionally mineral-oil or silicon based defoamers cause decrease the surface quallity of the film (orange peel, craters). At forced and stoving drying paints it can observed a higher cissing free filmthickness. ADDITOL VXW 6386 is qualified for following waterborne systems: stoving enamel based on alkyd- or acrylic-melamine resin, 2 component acrylic-isocyanate paints, paints based on waterdilutable alkyd resin and gloss and semigloss dispersion paint.

ADDITOL VXW 6393 was designed to destroy foam generated in emulsion wall-paints, based on PVAC, PVC, acrylics and their mixed polymers. Prior to using ADDITOL VXW 6393 it should be thoroughly agitated since it is prone to sediment fall out. When examining its rheology it is necessary to wait an additional 5 minutes. ADDITOL VXW 6393 can be easily emulsified and worked into the designated product.