ADDITOL XL 480´s Additive to improve surface quality of paint films, particularly automotive coatings. ADDITOL XL 480 may be used with any type of paint material, e.g. on the basis of alkyd/melamine systems, acrylics, polyurethane systems, oil-free polyesters, etc. ADDITOL XL 480 prevents surface defects of paint films. In most cases, the coemployment of ADDITOL XL 480 helps to prevent craters, even caused by neighbouring spray mists of other paints. Further, film defects caused by applicational conditions, like poor levelling,uneven surface, etc. can be avoided. The use of ADDITOL XL 480 affords higher security against surface defects on application

MODAFLOW Powder III resin modifier is an efficient flow aid for industrial powder coatings. Very fine, free flowing particles make MODAFLOW® Powder III easy to incorporate into epoxy, polyester, hybrid, urethane or acrylic powder formulations. Like other members of this family, MODAFLOW® Powder III offers users: Improved flow and leveling, Reduced pinholes, fisheyes, craters, and orange peel, Improved substrate wetting and Enhanced initial adhesion. MODAFLOW Powder III is composed of materials regulated by the U.S. Food and Drug Administration (FDA) for indirect food contact applications under several parts of Title 21, Code of Federal Regulations. Details on specific coverage are available upon request. MODAFLOW® Powder III contains no silicone. Optimum concentrations for a specific formulation should be determined by incremental addition. In general, MODAFLOW® Powder III use levels vary between 0.5 - 2.0 parts per hundred resin.

DOWSIL 67 ADDITIVE is a silicone wetting agent for aqueous coatings.

MODAFLOW 9200 is a new low‐viscosity flow modifier developed for high performance in solvent‐based automotive and industrial coatings, especially in clear top coat applications where it offers high gloss, low orange peel, and excellent DOI (Distinctivness of Image) in the coating film. Using of Modaflow 9200 can significantly improve the quality of the coatings as follows: improves flow and leveling, reduces pinholes, fisheyes, craters and orange peel, improves substrate wetting, improves or maintain high gloss, improves or maintain substrate and intercoat adhesion, facilitates pigment dispersion, quantity to be added: 0.1 ‐ 2.0 % on solid resin.