ARONIX M-8060 is a mulitfunctional polyester used as an oligomer for UV cure paints and adhesives. ARONIX is a brand name for special monomers and oligomers and includes special acrylates, urethane acrylates, and polyester acrylates for radical curing method.
ARON OXETANE, OXT221 is a 4 membered cyclic ether compounds used as cationic monomers for UV curing systems. Oxetane compounds are four-membered cyclic ethers that are similar to epoxy compounds, but with a higher rate of polymerisation and the cured materials exhibiting superior physical properties. Oxetane Resins can provide a wide range of hardness and flexibility, coupled with low shrinkage rates.
ARON OXETANE OXT-212 is a 4 membered cyclic ether compounds used as cationic monomers for UV curing systems. Oxetane compounds are four-membered cyclic ethers that are similar to epoxy compounds, but with a higher rate of polymerisation and the cured materials exhibiting superior physical properties. Oxetane Resins can provide a wide range of hardness and flexibility, coupled with low shrinkage rates.
SETAL A F 26 X is in the formulation of primers, knifing fillers, primer surfacers, top coats and dipping paints and flow coatings for radiators. Coatings based on SETAL A F 26 X are characterised by their very rapid drying and curing, high resistance to yellowing, weather stability and good anticorrosion properties. The use of alkaline pigments such as zinc phosphate, zinc oxide and aluminium triphosphate make it possible to optimize the anticorrosion properties of primers based on SETAL A F 26 X. Knifing fillers and primer surfacers applied in thickness of up to 200 μm can be dry-sanded within 1 hour. Combination with aminoplastic resins is recommended when formulating force-drying coatings.