ADDITOL VXL 4930 may be used in all solvent-containing and water-dilutable paint systems. It promotes the spray dust absorption, prevents orange peel and increases scratch resistance. ADDITOL VXL 4930 is effective at low concentrations and at the correct dosage, does not adversely affect intercoat adhesion. Blistering, cratering and floating in pigment blends are effectively prevented. It does not stabilize the foam during paint production and application. The substrate wetting is advanced.ADDITOL VXL 4930 is used primarily in industrial stoving/baking paints and 2K PUR paint systems.

ADDITOL VXW 6393 was designed to destroy foam generated in emulsion wall-paints, based on PVAC, PVC, acrylics and their mixed polymers. Prior to using ADDITOL VXW 6393 it should be thoroughly agitated since it is prone to sediment fall out. When examining its rheology it is necessary to wait an additional 5 minutes. ADDITOL VXW 6393 can be easily emulsified and worked into the designated product.

MODAFLOW Powder III resin modifier is an efficient flow aid for industrial powder coatings. Very fine, free flowing particles make MODAFLOW® Powder III easy to incorporate into epoxy, polyester, hybrid, urethane or acrylic powder formulations. Like other members of this family, MODAFLOW® Powder III offers users: Improved flow and leveling, Reduced pinholes, fisheyes, craters, and orange peel, Improved substrate wetting and Enhanced initial adhesion. MODAFLOW Powder III is composed of materials regulated by the U.S. Food and Drug Administration (FDA) for indirect food contact applications under several parts of Title 21, Code of Federal Regulations. Details on specific coverage are available upon request. MODAFLOW® Powder III contains no silicone. Optimum concentrations for a specific formulation should be determined by incremental addition. In general, MODAFLOW® Powder III use levels vary between 0.5 - 2.0 parts per hundred resin.

MODAFLOW LAMBDA is a unique acryl-silicone polymer hybrid technology flow promoter combining individual efficiencies from high end acrylic as well as silicone leveling performance. It is highly compatible in all non-aqueous clear coat and topcoat formulations and outperforms surface characteristics such as: gloss, DOI, sharpness & brilliancy, anti orange-peel effect. It is efficient at low dosage levels and incorporates easily in many solvent borne resin types including high solids and ultra-high solids. Further it can be applied in solvent free and radiation curing systems.MODAFLOW LAMBDA demonstrates superior balance of compatibility and effectiveness compared to traditional silicone or acrylic flow and leveling additives in Automotive OEM, refinish as well as industrial coatings. Due to its high hydroxyl functionality, MODAFLOW LAMBDA may be co cross-linked in stoving or 2K systems and does not show a decrease in interlayer adhesion. In multiple layer systems the stoving temperature should not exceed 130 °C to ensure a good recoatability. The recommended dosage level is 0.05 % calculated on total formulated coatings as a starting point and optimum dosage range is between 0.05 % - 0.3 %. In some cases the dosage could be increased up to 0,5 %.