ADDITOL XL 102 is used to improve the effectiveness of paint removers containing paraffine and wax. Post treatment with organic solvents is not necessary.

ADDITOL VXW 6208 is a dispersing and wetting additive for inorganic and organic pigments and extenders. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high-filled paint systems. It isn't compatible with binders which are dissolved in aliphatic hydrocarbons. ADDITOL VXW 6208 is used for the production of binder-free pigment pastes and for tinting base colours. ADDITOL VXW 6208/60 is mainly applied as wetting agent in solvent-free and solvent-borne two pack-epoxy-systems.

ADDITOL VXW 6386 Easy emulsifable defoamer, espacially for high quality waterborne sytems, at there conventionally mineral-oil or silicon based defoamers cause decrease the surface quallity of the film (orange peel, craters). At forced and stoving drying paints it can observed a higher cissing free filmthickness. ADDITOL VXW 6386 is qualified for following waterborne systems: stoving enamel based on alkyd- or acrylic-melamine resin, 2 component acrylic-isocyanate paints, paints based on waterdilutable alkyd resin and gloss and semigloss dispersion paint.

TUNGOPHEN B NV is applied as an additive in alkyd coatings. Additions of 1 - 3% TUNGOPHEN B NV, calculated on the 100% alkyd resin, greatly accelerate the through-drying and increase the gloss of alkyd coatings. Initial drying slows in proportion to the addition of TUNGOPHEN B NV. This improves the flow properties of the coating and reduces the likelihood of surface defects, even in thicker films. TUNGOPHEN B NV is usually added at room temperature as a solution in xylene. The addition of TUNGOPHEN B NV results in yellowing. For this reason, it should not be used in white coatings. The amount used in pale-colored coatings should be kept to a minimum. Addition of the product to coatings based on medium-oil alkyd resins, e.g. Setal A F 48, will result in particularly significant acceleration of through-drying. TUNGOPHEN B NV should not be used in styrenated alkyd resins, oil based coatings or oil/resin combination coatings.