All
8アイテムが見つかりました。
Thank you. Your request has been sent.
SETATHANE D E 2761
SETATHANE D E 2761 is applied in combination with Desmodur® VL as a binder for thermal-shock resistant cementitious 3K- PUR- screed. SETATHANE D E 2761 is suitable for the formulation of cementitious 3K- PURscreed for food and beverage industries. Mortars formulated with SETATHANE D E 2761 / Desmodur VL generally exhibit very good thermalshock resistance and resistance to organic and inorganic acids, alkalis and solvents. Over-crosslinking of 400 % and more is usual. To ensure blister-free curing, SETATHANE D E 2761 requires the addition of hydrated lime and cement as a CO2 scavenger.
化学品ビジネスライン
SETATHANE D E 2767
SETATHANE D E 2767 is applied in combination with aromatic polyisocyanates based on diphenylmethane diisocyanate as binder for solvent-free two-component polyurethane coatings with high chemical resistance for concrete and other porous substrates, fillers, sealing compounds and synthetic resin mortars. SETATHANE D E 2767 is suitable for the formulation of coatings, mortars and sealers with high chemical resistance. Coatings formulated with SETATHANE D E 2767 generally exhibit outstanding resistance to organic and inorganic acids, alkalis and solvents. Over-cross linking of 50 % and more is usual. This allows a wide-ranging variation in flow and chemical resistance. To ensure blister-free curing, SETATHANE D E 2767 requires the addition of hydrated lime in accordance with DIN EN 12 518 (or cement if necessary) as a CO2 scavenger. In certain cases where the film thickness is less than 100 μm, there is no need to add hydrated lime.
化学品ビジネスライン
BECKOCOAT PU 428/51XMPAC
BECKOCOAT PU 428/51XMPAC is a rapid curing. Radiant brilliance. Superior abrasion resistance. Outstanding impact resistance, excellent adhesion. Floor sealers, wood coating, concrete impregnation. Crosslinker for alkyd resins in two-component systems.The extreme abrasion resistance, impact resistance, and chemical resistance make Beckocoat PU 428 films cured with the action of air humidity an excellent sealer and impregnation medium for concrete, a binder for non-slip coatings, for concrete coatings resistant to fuel oil and abrasion, for instance in garages, or for floorings and coatings for walls and ceilings in laboratories, chemical factories, etc. The films cure to radiant brilliance and can also be recommended for wooden floors subject to heavy wear like in bowling alleys, roller skating rinks, dancing halls, gymnasiums and schools. Beckocoat PU 428 has also proved an ideal vehicle for coating sports articles like spears, bowling pins, golf balls, bats, hockey sticks, tennis rackets, etc. In exterior use, Beckocoat PU 428 will lose gloss and will yellow. Weather resistance and gloss retention can be enhanced through coemploying alkyd resins like VIALKYD AR 408.
化学品ビジネスライン
SETATHANE D 1155
SETATHANE D 1155 is applied in combination with e.g. SETATHANE D 1145 and 1150 in the formulation of coatings SETATHANE D 1155 is not recommended as a sole binder. Because of its low viscosity, SETATHANE D 1155 is especially suitable for combination with SETATHANE D 1145 and 1150 in the formulation of solventfree, self-leveling polyurethane coatings of low viscosity. Desmodur® VL or VL 50 are normally used as hardener.
化学品ビジネスライン
ご注文カートに追加されました。
店舗所在地別の商品の在庫状況
時間