text.skipToContent text.skipToNavigation

All

15アイテムが見つかりました。

フィルター
適用されたフィルターすべてクリア

カテゴリ
サブカテゴリ
サプライヤー
Sustainable
サンプルリクエスト
要求者の連絡先の詳細
フルネーム
会社
位置
電話番号
仕事用メールアドレス
お届け先の住所

Thank you. Your request has been sent.

SETAL 82166 SS-64

SETAL 82166 SS-64 is a combination with aliphatic poly-isocyanates: good anti-sag property with good levelling and clarity after drying at increased or ambient temperature. Good outdoor durability, excellent mechanical properties. It is flexible clearcoats applied over basecoats. Clearcoat has good anti-sag property directly after spraying of high film thickness. Easy handling at paint preparation and good storage stability.
SETAL 82166 SS-55

SETAL 82166 SS-55 is a combination with aliphatic poly-isocyanates: good anti-sag property with good levelling and clarity after drying at increased or ambient temperature. Good outdoor durability, excellent mechanical properties. It is used as flexible clearcoats applied over basecoats. Clearcoat has good anti-sag property directly after spraying of high film thickness. Easy handling at paint preparation and good storage stability.
SETAL 1603 BA-78

SETAL 1603 BA-78 provides VOC compliant coatings (400 g/l) with high build and gloss, very good outdoor durability, good mechanical properties and good chemical resistance (in combination with aliphatic poly-isocyanates). It is used as two component clearcoats and solid colour topcoats for vehicle refinish. Co-binder for combination with acrylic resins for two component systems with reduced VOC.
ROSKYDAL K 60

ROSKYDAL K 60 is a binder for highly filled, coarse and fine knifing fillers with long potlife. ROSKYDAL K 60 enables formulation of fillers with long potlife of 30-45 min. using the standard hardener Di-Benzoylperoxide. ROSKYDAL K 60 is also suitable for fillers with overbaking resistance at temperatures up to 170°C. Fillers based on ROSKYDAL K 60 cure fully when applied in both thin and thick coats.They can be made harder by the addition of e.g. ROSKYDAL K 14 M or ROSKYDAL K 36. Formulation Talc, dolomite/calcite and powdered barytes with low iron content have proven suitable as extenders, with talc as the main component because it improves the adhesion to the substrate. Only coarse and blended talcs should be used to formulate fillers with overbaking resistance up to 170°C.
商品数量を更新しました。